Read Sony DVP-NS585P / DVP-NS590P (serv.man2) Service Manual online
1-5
21
Hookups
Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
an MD deck or DAT deck
If the stereo amplifier (receiver) has audio input jacks L and R only, use
. If the amplifier
(receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use
.
In this case, you can also connect the player directly to the MD deck or DAT deck without using
your stereo amplifier (receiver).
your stereo amplifier (receiver).
B
B-1
B-2
COMPONENT
VIDEO
OUT
/
PR
/
CR
VIDEO
NORMAL
PROGRESSIVE
PROGRESSIVE
S VIDEO OUT
LINE OUT
Y
PB
CB
LINE
(RGB)
-TV
L
C E N T E R
LINE OUT
AUDIO
R
L
B-1
LINE OUT
AUDIO
R
L
PCM/
DTS/
MPEG/
DOLBY
DIGITAL OPTICAL
DTS/
MPEG/
DOLBY
DIGITAL OPTICAL
COAXIAL
DIGITAL OUT
B-2
PCM/
DTS/
MPEG/
DOLBY
DIGITAL OPTICAL
DTS/
MPEG/
DOLBY
DIGITAL OPTICAL
COAXIAL
DIGITAL OUT
CD/DVD player
or
Stereo amplifier (receiver)
MD deck/DAT deck
Front (L)
Front (R)
[Speakers]
(white)
(red)
(red)
(white)
Optical digital cord
(not supplied)
Remove jack cap
before connecting Stereo audio cord
(not supplied)
Remove jack cap
before connecting Stereo audio cord
(not supplied)
to audio input
to coaxial or optical digital input
Coaxial digital cord
(not supplied)
(not supplied)
or
l: Signal flow
* For DVP-NS585P only
to LINE OUT L/R (AUDIO)
to DIGITAL OUT
(COAXIAL or OPTICAL*)
(COAXIAL or OPTICAL*)
,continued
22
Connecting to an AV amplifier (receiver) having a Dolby Surround (Pro
Logic) decoder and 3 to 6 speakers
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multi-
channel audio (Dolby Digital) discs.
If your amplifier (receiver) has L and R audio input jacks only, use
channel audio (Dolby Digital) discs.
If your amplifier (receiver) has L and R audio input jacks only, use
. If your amplifier
(receiver) has a digital input jack, use
.
Note
When connecting 6 speakers, replace the monaural
rear speaker with a centre speaker, 2 rear speakers
and a subwoofer.
rear speaker with a centre speaker, 2 rear speakers
and a subwoofer.
C
C-1
C-2
COMPONENT
VIDEO
OUT
/
PR
/
CR
VIDEO
NORMAL
PROGRESSIVE
PROGRESSIVE
S VIDEO OUT
LINE OUT
Y
PB
CB
LINE
(RGB)
-TV
L
C E N T E R
LINE OUT
AUDIO
R
L
C-1
PCM/
DTS/
MPEG/
DOLBY
DIGITAL OPTICAL
DTS/
MPEG/
DOLBY
DIGITAL OPTICAL
COAXIAL
DIGITAL OUT
C-2
PCM/
DTS/
MPEG/
DOLBY
DIGITAL OPTICAL
DTS/
MPEG/
DOLBY
DIGITAL OPTICAL
COAXIAL
DIGITAL OUT
LINE OUT
AUDIO
R
L
CD/DVD player
or
Front (R)
Front (L)
Rear (R)
Subwoofer
Rear (L)
Amplifier (receiver) with Dolby
Surround decoder
Surround decoder
Centre
Rear (mono)
Stereo audio cord
(not supplied)
(not supplied)
[Speakers]
Optical digital cord
(not supplied)
Remove jack cap
before connecting
(not supplied)
Remove jack cap
before connecting
(red)
(white)
to coaxial or optical digital input
Coaxial digital cord
(not supplied)
(not supplied)
[Speakers]
or
to audio input
(white)
(red)
to LINE OUT L/R (AUDIO)
to DIGITAL OUT
(COAXIAL or OPTICAL*)
(COAXIAL or OPTICAL*)
l: Signal flow
* For DVP-NS585P only
23
Hookups
Connecting to an AV amplifier (receiver) with a digital input jack having
a Dolby Digital, MPEG audio or DTS decoder and 6 speakers
This connection will allow you to use the Dolby Digital, MPEG audio or DTS decoder function
of your AV amplifier (receiver).
of your AV amplifier (receiver).
z
Hint
Use connection
when connecting to 7 or
more speakers (6.1 ch or more).
Notes
• After you have completed the connection, be sure
to set “DOLBY DIGITAL” to “DOLBY
DIGITAL” and “DTS” to “ON” in Quick Setup
(page 24). If your AV amplifier (receiver) has an
MPEG audio decoder function, set “MPEG” to
DIGITAL” and “DTS” to “ON” in Quick Setup
(page 24). If your AV amplifier (receiver) has an
MPEG audio decoder function, set “MPEG” to
“MPEG” (page 68). Otherwise, no sound or a
loud noise will come from the speakers.
loud noise will come from the speakers.
• In order to listen to DTS sound tracks, you must
use this connection. DTS sound tracks are not
output through the LINE OUT L/R (AUDIO)
jacks, even if you set “DTS” to “ON” in Quick
Setup (page 24).
output through the LINE OUT L/R (AUDIO)
jacks, even if you set “DTS” to “ON” in Quick
Setup (page 24).
• When you connect an amplifier (receiver) that
conforms to the 96 kHz sampling frequency, set
“48kHz/96kHz PCM” in “AUDIO SETUP” to
“96kHz/24bit” (page 68).
“48kHz/96kHz PCM” in “AUDIO SETUP” to
“96kHz/24bit” (page 68).
D
COMPONENT
VIDEO
OUT
/
PR
/
CR
VIDEO
NORMAL
PROGRESSIVE
PROGRESSIVE
S VIDEO OUT
LINE OUT
Y
PB
CB
LINE
(RGB)
-TV
L
C E N T E R
LINE OUT
AUDIO
R
L
PCM/
DTS/
MPEG/
DOLBY
DIGITAL OPTICAL
DTS/
MPEG/
DOLBY
DIGITAL OPTICAL
COAXIAL
DIGITAL OUT
D
PCM/
DTS/
MPEG/
DOLBY
DIGITAL OPTICAL
DTS/
MPEG/
DOLBY
DIGITAL OPTICAL
COAXIAL
DIGITAL OUT
Front (R)
Front (L)
Rear (R)
AV amplifier (receiver) having
a decoder
a decoder
Subwoofer
Centre
Optical digital cord
(not supplied)
Remove jack cap
before connecting
(not supplied)
Remove jack cap
before connecting
Coaxial digital cord
(not supplied)
(not supplied)
[Speakers]
CD/DVD player
l: Signal flow
* For DVP-NS585P only
[Speakers]
Rear (L)
to optical digital input
or
to coaxial digital input
to DIGITAL OUT
(COAXIAL or OPTICAL*)
(COAXIAL or OPTICAL*)
D
,continued
24
Step 5: Connecting the Mains Lead
Plug the player and TV mains lead (power cord) into a mains.
Step 6: Quick Setup
Follow the steps below to make the minimum number of basic adjustments for using the player.
To skip an adjustment, press >. To return to the previous adjustment, press ..
The on-screen display differ depending on the player model.
To skip an adjustment, press >. To return to the previous adjustment, press ..
The on-screen display differ depending on the player model.
1
Turn on the TV.
2
Press [/1.
3
Switch the input selector on your
TV so that the signal from the
player appears on the TV screen.
TV so that the signal from the
player appears on the TV screen.
“Press [ENTER] to run QUICK SETUP”
appears at the bottom of the screen. If this
message does not appear, select
“QUICK” under “SETUP” in the Control
Menu to run Quick Setup (page 63).
appears at the bottom of the screen. If this
message does not appear, select
“QUICK” under “SETUP” in the Control
Menu to run Quick Setup (page 63).
4
Press ENTER without inserting a
disc.
disc.
The Setup Display for selecting the
language used in the on-screen display
appears.
language used in the on-screen display
appears.
5
Press X/x to select a language.
The player uses the language selected
here to display the menu and subtitles as
well.
here to display the menu and subtitles as
well.
6
Press ENTER.
The Setup Display for selecting the
aspect ratio of the TV to be connected
appears.
aspect ratio of the TV to be connected
appears.
7
Press X/x to select the setting that
matches your TV type.
matches your TV type.
◆ If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
• 16:9 (page 64)
◆ If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
standard TV with a wide-screen mode
• 16:9 (page 64)
◆ If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
(page 64)
ENTER
LANGUAGE SETUP
OSD:
MENU:
AUDIO:
SUBTITLE:
MENU:
AUDIO:
SUBTITLE:
ITALIANO
ESPAÑOL
NEDERLANDS
DANSK
SVENSKA
FRANÇAIS
ENGLISH
ENGLISH
DEUTSCH
SCREEN SETUP
TV TYPE:
16:9
4:3 LETTER BOX
4:3 PAN SCAN
ON
AUTO
SCREEN SAVER:
BACKGROUND:
LINE:
COMPONENT OUT:
MODE
BACKGROUND:
LINE:
COMPONENT OUT:
MODE
(PROGRESSIVE)
:
16:9
Click on the first or last page to see other DVP-NS585P / DVP-NS590P (serv.man2) service manuals if exist.