Read Sony DVP-NS38 / DVP-NS39 / DVP-NS47P / DVP-NS57P / DVP-NS64P / DVP-NS67P Service Manual online
1-4
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P
15
H
oo
kups
kups
Step 3: Connecting the Video Cords
Connect this player to your TV monitor, projector, or AV amplifier (receiver) using a video cord.
Select one of the patterns
Select one of the patterns
A or B, according to the input jack on your TV monitor, projector,
or AV amplifier (receiver).
In order to view progressive signal (480p) pictures with a compatible TV, projector, or monitor,
you must use pattern
In order to view progressive signal (480p) pictures with a compatible TV, projector, or monitor,
you must use pattern
B.
A
If you are connecting to a video input jack
Connect the yellow plug of an audio/video cord (supplied) to the yellow (video) jack. You will
enjoy standard quality images.
enjoy standard quality images.
R-AUDIO-L
DIGITAL OUT
COAXIAL
LINE OUT
VIDEO
COMPONENT VIDEO OUT
PR
Y
PB
A
VIDEO
AUDIO
INPUT
L
R
P
R
P
B
Y
COMPONENT
VIDEO IN
B
Audio/video
cord (supplied)
cord (supplied)
l : Signal flow
(yellow)
CD/DVD player
TV, projector or AV
amplifier (receiver)
amplifier (receiver)
(green)
Component
video cord
(not supplied)
video cord
(not supplied)
TV, projector or AV
amplifier (receiver)
amplifier (receiver)
(red)
(blue)
(yellow)
to LINE OUT (VIDEO)
to COMPONENT
VIDEO OUT
VIDEO OUT
(green)
(blue)
(red)
Yellow
White (L)
Red (R)
Yellow
White (L)
Red (R)
,continued
16
B
If you are connecting to a monitor, projector, or AV amplifier
(receiver) having component video input jacks (Y, P
B
, P
R
)
Connect the component via the COMPONENT VIDEO OUT jacks using a component video
cord (not supplied) or three video cords (not supplied) of the same kind and length. You will
enjoy accurate color reproduction and high quality images.
If your TV accepts progressive 480p format signals, use this connection and set
“PROGRESSIVE (COMPONENT OUT)” in “SCREEN SETUP” to “ON” (page 62) to output
progressive signals.
cord (not supplied) or three video cords (not supplied) of the same kind and length. You will
enjoy accurate color reproduction and high quality images.
If your TV accepts progressive 480p format signals, use this connection and set
“PROGRESSIVE (COMPONENT OUT)” in “SCREEN SETUP” to “ON” (page 62) to output
progressive signals.
When connecting to a wide screen TV
Depending on the disc, the image may not fit your TV screen. To change the aspect ratio, see
page 61.
Depending on the disc, the image may not fit your TV screen. To change the aspect ratio, see
page 61.
Note
Do not connect a VCR, etc., between your TV and the player. If you pass the player signals via the VCR, you
may not receive a clear image on the TV screen. If your TV has only one audio/video input jack, connect the
player to this jack.
may not receive a clear image on the TV screen. If your TV has only one audio/video input jack, connect the
player to this jack.
Green
Blue
Red
Green
Blue
Red
VCR
CD/DVD player
TV
Connect
directly
directly
17
H
oo
kups
kups
Step 4: Connecting the Audio Cords
Select one of the following patterns
A or B, according to the input jack on your TV monitor,
projector, or AV amplifier (receiver).
This will enable you to listen to sound.
This will enable you to listen to sound.
z Hint
For correct speaker location, see the operating instructions supplied with the connected components.
For correct speaker location, see the operating instructions supplied with the connected components.
VIDEO
AUDIO
INPUT
L
R
R-AUDIO-L
LINE OUT
VIDEO
COMPONENT VIDEO OUT
PR
Y
PB
DIGITAL OUT
COAXIAL
B
A
R-AUDIO-L
LINE OUT
VIDEO
DIGITAL OUT
COAXIAL
AV amplifier (receiver)
with a decoder
with a decoder
(red)
TV, projector, or AV
amplifier (receiver)
amplifier (receiver)
Audio/video
cord (supplied)
cord (supplied)
: Signal flow
Coaxial digital cord
(not supplied)
(not supplied)
to DIGITAL OUT (COAXIAL)
to LINE OUT L/R (AUDIO)
Rear (L)
CD/DVD player
(white)
(yellow)*
(yellow)*
(white)
(red)
[Speakers]
Front (L)
[Speakers]
to coaxial
digital input
digital input
Rear (R)
Front (R)
Subwoofer
Center
* The yellow plug is used for video signals (page 15).
,continued
18
A
Connecting to audio L/R input
jacks
This connection will use your TV’s or stereo
amplifier’s (receiver’s) two speakers for
sound. Connect using the audio/video cord
(supplied).
amplifier’s (receiver’s) two speakers for
sound. Connect using the audio/video cord
(supplied).
• Surround effect (page 40)
TV: Dynamic Theater, Dynamic, Wide,
Night
TV: Dynamic Theater, Dynamic, Wide,
Night
Stereo amplifier (receiver): Standard, Night
B
Connecting to a digital audio
input jack
If your AV amplifier (receiver) has a Dolby*
1
Digital or DTS*
2
decoder and a digital input
jack, use this connection.
Connect using a digital coaxial cord (not
supplied).
Connect using a digital coaxial cord (not
supplied).
• Surround effect
Dolby Digital (5.1ch), DTS (5.1ch)
Dolby Digital (5.1ch), DTS (5.1ch)
*1
Manufactured under license from Dolby
Laboratories.
“Dolby”, “Pro Logic”, and the double-D symbol
are trademarks of Dolby Laboratories.
Laboratories.
“Dolby”, “Pro Logic”, and the double-D symbol
are trademarks of Dolby Laboratories.
*2
“DTS” and “DTS Digital Out” are trademarks of
Digital Theater Systems, Inc.
Digital Theater Systems, Inc.
Notes
• After you have completed the connection, make
the appropriate settings in Quick Setup (page 19).
Otherwise, no sound or a loud noise will come
from your speakers.
Otherwise, no sound or a loud noise will come
from your speakers.
• The TVS effects of this player cannot be used
with this connection.
• In order to listen to DTS sound tracks, you must
use this connection. DTS sound tracks are not
output through the LINE OUT L/R (AUDIO)
jacks, even if you set “DTS” to “ON” in Quick
Setup (page 19).
output through the LINE OUT L/R (AUDIO)
jacks, even if you set “DTS” to “ON” in Quick
Setup (page 19).
Yellow
White (L)
Red (R)
Yellow
White (L)
Red (R)
Coaxial cord
Click on the first or last page to see other DVP-NS38 / DVP-NS39 / DVP-NS47P / DVP-NS57P / DVP-NS64P / DVP-NS67P service manuals if exist.