DVP-NS355, DVP-NS501P, DVP-NS507P, DVP-NS525P, DVP-NS575P, DVP-NS585P - Sony DVD Service Manual (repair manual). Page 8

1-4

B If you are connecting to an S VIDEO input jack

Connect an S VIDEO cord (not supplied). You will enjoy high quality images.

C If you are connecting to a monitor, projector, or AV amplifier (receiver) 
having component video input jacks (Y, P

Connect the component via the COMPONENT VIDEO OUT jacks using a component video 
cord (not supplied) or three video cords (not supplied) of the same kind and length. You will 
enjoy accurate color reproduction and high quality images. If your TV accepts progressive 
(480p) format signals, you must use this connection and set NORMAL/PROGRESSIVE switch 
to PROGRESSIVE (page 66). The PROGRESSIVE indicator lights up when the player outputs 
progressive signals. 

Depending on the disc, the image may not fit your TV screen. If you want to change the aspect 
ratio, please refer to page 65.

• Connect the player directly to the TV. If you pass the player signals via the VCR, etc., you may not receive 

a clear image on the TV screen.

• Consumers should note that not all high definition television sets are fully compatible with this product and 

may cause artifacts to be displayed in the picture. In the case of 480 progressive scan picture problems, it 
is recommended that the user switch the connection to the ‘standard definition’ output. If there are questions 
regarding our TV set compatibility with this model 480p DVD player, please contact our customer service 
center.

Green

Blue

Red

Green

Blue

Red

VCR

CD/DVD player

TV

Connect 
directly

Refer to the chart below to select the connection that best suits your system. Be sure to also read 
the instructions for the components you wish to connect.

Select one of the following connections, 

 through 

. 

z Hint
If you connect an AV amplifier (receiver) that 
conforms to the 96 kHz sampling frequency, use 
connection .

 * Manufactured under license from Dolby 

Laboratories. “Dolby,” “Pro Logic,” and the 
double-D symbol are trademarks of Dolby 
Laboratories.

** “DTS” and “DTS Digital Out” are trademarks 

of Digital Theater Systems, Inc.

 (page 21)

Stereo amplifier (receiver) and two speakers
or
MD deck/DAT deck

 (page 22)

AV amplifier (receiver) having a Dolby* 
Surround (Pro Logic) decoder and 3 to 6 
speakers

 (page 23)

AV amplifier (receiver) with digital input jacks 
having a Dolby Digital or DTS** decoder and 6 
speakers

 (page 24)

This connection will use your TV’s speakers for sound.

* The yellow plug is used for video signals (page 

18).

z Hint
When connecting to a monaural TV, use a stereo-
mono conversion cord (not supplied). Connect the 
LINE OUT L/R (AUDIO) jacks to the TV’s audio 
input jack.

COMPONENT

VIDEO OUT

PCM/DTS/

DOLBY DIGITAL

COAXIAL

PR

VIDEO

NORMAL
PROGRESSIVE

DIGITAL OUT

LINE OUT

S VIDEO OUT

LINE OUT

AUDIO

R

L

Y

PB

LINE OUT

AUDIO

R

L

TV

l : Signal flow

(white)

(red)

Audio/video 
cord (supplied)

to audio input

(yellow)*

(white)

(red)

(yellow)*

to LINE OUT L/R 
(AUDIO)

CD/DVD player

,continued

If the stereo amplifier (receiver) has audio input jacks L and R only, use 

. If the amplifier 

(receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use 

. 

In this case, you can also connect the player directly to the MD deck or DAT deck without using 
your stereo amplifier (receiver).

COMPONENT

VIDEO OUT

PCM/DTS/

DOLBY DIGITAL

COAXIAL

PR

VIDEO

NORMAL
PROGRESSIVE

DIGITAL OUT

LINE OUT

S VIDEO OUT

LINE OUT

AUDIO

R

L

Y

PB

LINE OUT

AUDIO

R

L

PCM/DTS/

DOLBY DIGITAL

COAXIAL

DIGITAL OUT

CD/DVD player

or

Stereo amplifier (receiver)

MD deck/DAT deck

Front (L)

Front (R)

[Speakers]

(red)

(white)

(red)

(white)

Coaxial digital 
cord (not 
supplied)

Stereo audio cord 
(not supplied)

to audio input

to coaxial 
digital input

to LINE OUT L/R (AUDIO)

to DIGITAL OUT 
(COAXIAL)

l: Signal flow