Read Sony DVP-NS300 Service Manual online
1-6
26
qa
Press ENTER.
DTS is selected.
Press X/x to select the item.
Choose the item that matches the audio connection you selected in page 21 to 23 (
through ).
qd
Press ENTER.
Quick Setup is finished. All connections and setup operations are complete.
Note
You can directly start Quick Setup only when you run it for the first time.
To run Quick Setup a second time, select “QUICK” under SETUP in the Control Menu (page 54).
To run Quick Setup a second time, select “QUICK” under SETUP in the Control Menu (page 54).
To enjoy the surround sound effects of this player or your amplifier (receiver), the following
items must be set as described below for the audio connection you selected in page 21 to 23
(
items must be set as described below for the audio connection you selected in page 21 to 23
(
through
). Each of these are the default settings and do not need to be adjusted when
you first connect the player. Refer to page 56 for using the Setup Display.
Audio Cord Connection Type
You select
Page
D-PCM
59
DOLBY DIGITAL (only if the
amplifier/receiver has a Dolby
Digital decoder)
amplifier/receiver has a Dolby
Digital decoder)
59
Audio Cord Connection Type
You select
Page
OFF
59
ON (only if the amplifier/receiver
has a DTS decoder)
has a DTS decoder)
59
Enjoying the surround sound effects
B-2
C-2
D
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
DTS:
DTS:
OFF
STANDARD
ON
DOWNMIX:
DOLBY SURROUND
D-PCM
OFF
OFF
OFF
ON
B
A
D
B-2
C-2
A
D
B
A
D
Hookups
27
Audio Connection (page 19 to 23)
No additional settings are needed.
•
If the sound distorts even when the volume is turned down, set “AUDIO ATT ” to “ON” (page 58).
Item
Yo u select
Page
DOWNMIX
DOLBY SURROUND
58
Item
Yo u select
Page
DOWNMIX
DOLBY SURROUND
58
DIGITAL OUT
ON
59
A
B-1
C-1
B-2
C-2
D
28
Playing Discs
Playing Discs
Depending on the DVD or VIDEO CD, some
operations may be different or restricted.
operations may be different or restricted.
Refer to the operating instructions supplied
with your disc.
with your disc.
1
Turn on your TV.
2
Switch the input selector on the TV
to the player.
to the player.
When using an amplifier (receiver)
Turn on the amplifier (receiver) and
select the appropriate channel.
select the appropriate channel.
3
Press POWER on the player.
The player enters standby mode and the
power indicator lights up in red.
power indicator lights up in red.
4
Press A on the player, and place a
disc on the disc tray.
disc on the disc tray.
The player automatically turns on and
the power indicator lights up in green.
the power indicator lights up in green.
5
Press H.
The disc tray closes, and the player
starts playback (continuous play).
Adjust the volume on the TV or the
amplifier (receiver).
starts playback (continuous play).
Adjust the volume on the TV or the
amplifier (receiver).
After following Step 5
Depending on the disc, a menu may appear
on the TV screen. You can play the disc
interactively by following the instructions on
the menu. DVD (page 31), VIDEO CD (page
32).
on the TV screen. You can play the disc
interactively by following the instructions on
the menu. DVD (page 31), VIDEO CD (page
32).
To turn on the player
Press the POWER switch on the player. The
player enters standby mode and the power
indicator lights up in red. Press [/1 on the
remote. The player turns on and the power
indicator lights up in green. In standby mode,
the player also turns on by pressing A on the
player or by pressing H.
player enters standby mode and the power
indicator lights up in red. Press [/1 on the
remote. The player turns on and the power
indicator lights up in green. In standby mode,
the player also turns on by pressing A on the
player or by pressing H.
To turn off the player
Press [/1 on the remote. The player enters
standby mode and the power indicator lights
up in red. To turn off the player completely,
press POWER on the player. While playing
a disc, do no turn off the player by pressing
POWER. Doing so may cancel the menu
settings. When you turn off the player, first
press x to stop playback and then press [/1
on the remote
standby mode and the power indicator lights
up in red. To turn off the player completely,
press POWER on the player. While playing
a disc, do no turn off the player by pressing
POWER. Doing so may cancel the menu
settings. When you turn off the player, first
press x to stop playback and then press [/1
on the remote
POWER
A
H
Power indicator
[
/
1
H
x
AUDIO
x
With the playback side facing down
P
la
y
ing Disc
s
29
Notes on playing DTS sound tracks on
a CD
•
When playing DTS-encoded CDs,
excessive noise will be heard from the
analog stereo jacks. To avoid possible
damage to the audio system, the consumer
should take proper precautions when the
analog stereo jacks of the player are
connected to an amplification system. To
enjoy DTS Digital Surround™ playback, an
external 5.1-channel decoder system must
be connected to the digital jacks of the
player.
excessive noise will be heard from the
analog stereo jacks. To avoid possible
damage to the audio system, the consumer
should take proper precautions when the
analog stereo jacks of the player are
connected to an amplification system. To
enjoy DTS Digital Surround™ playback, an
external 5.1-channel decoder system must
be connected to the digital jacks of the
player.
•
Set the sound to “STEREO” using the
AUDIO button when you play DTS sound
tracks on a CD (page 42).
AUDIO button when you play DTS sound
tracks on a CD (page 42).
•
Do not play DTS sound tracks without first
connecting the player to an audio
component having a built-in DTS decoder.
The player outputs the DTS signal via the
DIGITAL OUT (OPTICAL and
COAXIAL) jacks even if “DTS” in
“AUDIO SETUP” is set to “OFF” in the
Setup Display (page 60), and may affect
your ears or cause your speakers to be
damaged.
connecting the player to an audio
component having a built-in DTS decoder.
The player outputs the DTS signal via the
DIGITAL OUT (OPTICAL and
COAXIAL) jacks even if “DTS” in
“AUDIO SETUP” is set to “OFF” in the
Setup Display (page 60), and may affect
your ears or cause your speakers to be
damaged.
Notes on playing DVDs with a DTS
sound track
•
DTS audio signals are output only through
the DIGITAL OUT (OPTICAL and
COAXIAL) jacks.
the DIGITAL OUT (OPTICAL and
COAXIAL) jacks.
•
If you connect the player to audio
equipment without a DTS decoder, do not
set “DTS” to “ON” in “AUDIO SETUP”
(page 59). A loud noise may come out from
the speakers, affecting your ears or causing
the speakers to be damaged.
equipment without a DTS decoder, do not
set “DTS” to “ON” in “AUDIO SETUP”
(page 59). A loud noise may come out from
the speakers, affecting your ears or causing
the speakers to be damaged.
•
When you play a DVD with DTS sound
tracks, set “DTS” to “ON” in “AUDIO
SETUP” (page 59).
tracks, set “DTS” to “ON” in “AUDIO
SETUP” (page 59).
z
The Instant Replay function is useful when you
want to review a scene or dialog that you missed.
Note
You may not be able to use the Instant Replay function
with some scenes.
with some scenes.
Additional operations
To
Operation
Stop
Press x
Pause
Press X
Resume play after
pause
pause
Press X or H
Go to the next chapter,
track or scene in
continuous play mode
track or scene in
continuous play mode
Press >
Go back to the
preceding chapter,
track or scene in
continuous play mode
preceding chapter,
track or scene in
continuous play mode
Press .
Stop play and remove
the disc
the disc
Press Z
Replay a previous
scene (DVD only)
scene (DVD only)
Press INSTANT
REPLAY
REPLAY
.
/
>
X
Z
x
INSTANT
REPLAY
REPLAY
H
Click on the first or last page to see other DVP-NS300 service manuals if exist.