Read Sony DVP-NS300 Service Manual online
1-4
18
Connect the yellow plug of the audio/video cord (supplied) to the yellow (video) jacks. Yo u will
enjoy standard quality images.
enjoy standard quality images.
Use the red and white plugs to connect to the audio input jacks (page 19).
Connect the S VIDEO cord (not supplied). Yo u will enjoy high quality images.
Connect the component via the COMPONENT VIDEO OUT jacks using a component video cord
(not supplied) or three video cords (not supplied) of the same kind and length. Yo u will enjoy
accurate color reproduction and high quality images.
(not supplied) or three video cords (not supplied) of the same kind and length. Yo u will enjoy
accurate color reproduction and high quality images.
Note
Do not connect your player to a VCR. Yo u may not receive a clear image on the TV screen if you pass the player
signals via the VCR.
signals via the VCR.
A
If you are connecting to a video input jack
B
If you are connecting to an S VIDEO input jack
C
If you are connecting to a monitor, projector, or AV amplifier (receiver) having
component video input jacks (Y, P
B
, P
R
)
Yellow (Video)
White (L)
Red (R)
Ye llow (Video)
White (L)
Red (R)
VCR
CD/DVD player
TV
Connect directly
Hookups
19
Step 2: Connecting the Audio Cords
Refer to the chart below to select the connection that best suits your system. The surround effects
you will enjoy depend on the connections and components you use.
you will enjoy depend on the connections and components you use.
Select one of the following connections,
through
.
* Manufactured under license from Dolby Laboratories. “Dolby,” “Pro Logic,” and the double-D symbol are
trademarks of Dolby Laboratories. Confidential unpublished works. © 1992-1997 Dolby Laboratories. All rights
reserved.
reserved.
** “DTS” is a registered trademark of Digital Theater Systems, Inc.
Select a connection
Connection
Components to be connected
(page 20)
•
TV (stereo)
(page 21)
•
Stereo amplifier (receiver)
(having L and R audio input jacks only, or having a digital input jack)
(having L and R audio input jacks only, or having a digital input jack)
•
2 speakers
(front L and R)
(front L and R)
(page 21)
•
MD deck/DAT deck
(page 22)
•
AV amplifier (receiver) with a Dolby
*
Surround (Pro Logic) decoder
(having L and R audio input jacks only, or having a digital input jack)
•
3 speakers
(front L and R, and rear (monaural))
(front L and R, and rear (monaural))
•
6 speakers
(front L and R, center, rear L and R, and subwoofer)
(front L and R, center, rear L and R, and subwoofer)
(page 23)
•
AV amplifier (receiver) having a Dolby Digital or DTS
**
decoder and a digital
input jack
•
6 speakers
(front L and R, rear L and R, center, and subwoofer)
(front L and R, rear L and R, center, and subwoofer)
A
D
A
B
B
C
D
continued
20
This connection will use your TV speakers for sound.
xRecommended surround sound effects for this connection
•
TVS DYNAM IC (page 43)
•
TVS WIDE (page 43)
The yellow plug is used for video signals (page 17).
Connecting to your TV
A
PCM/DTS/
DOLBY DIGITAL
S VIDEO
OUT
COMPONENT
VIDEO OUT
COAXIAL OPTICAL
R-AUDIO 1-L
VIDEO 1
Y
P
B
P
R
R-AUDIO 2-L
VIDEO 2
DIGITAL OUT
LINE OUT
R-AUDIO 1-L
VIDEO 1
R-AUDIO 2-L
VIDEO 2
LINE OUT
A
TV
l
: Signal flow
CD/DVD player
Audio/video cord
(supplied)
(supplied)
(white)
(red)
(yellow)
(white)
(red)
(yellow)
to audio input
Hookups
21
This connection will use your 2 front speakers connected to your stereo amplifier (receiver) for
sound. If the stereo amplifier (receiver) has audio input jacks L and R only, use
sound. If the stereo amplifier (receiver) has audio input jacks L and R only, use
. If the
amplifier (receiver) has a digital input jack, use
. When connecting to an MD deck or a DAT
deck, use
. In this case, you can also connect the player directly to the MD deck or DAT
deck without using your stereo amplifier (receiver).
xRecommended surround sound effects for the
connection only
•
TVS STANDARD (page 43)
z
In connection
, you can use the supplied audio/video cord instead of using a separate audio cord.
z
To realize better surround sound effects, make sure that your listening position is in between your speakers.
Note
If you select one of the TVS effects while playing a disc, no sound will come from your speakers with the
connection.
Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
an MD deck or DAT deck
B
B-1
B-2
B-2
B-1
B-1
B-2
PCM/DTS/
DOLBY DIGITAL
S VIDEO
OUT
COMPONENT
VIDEO OUT
COAXIAL OPTICAL
R-AUDIO 1-L
VIDEO 1
Y
P
B
P
R
R-AUDIO 2-L
VIDEO 2
DIGITAL OUT
LINE OUT
PCM/DTS/
DOLBY DIGITAL
COAXIAL OPTICAL
DIGITAL OUT
B-2
B-1
VIDEO 1
R-AUDIO 2-L
VIDEO 2
LINE OUT
R-AUDIO 1-L
l
: Signal flow
CD/DVD player
or
Stereo amplifier (receiver)
MD deck/DAT deck
Front
(L)
Front
(R)
[Speakers]
(white)
(red)
(white)
(red)
Coaxial digital
cord (not supplied)
cord (not supplied)
Stereo audio cord
(not supplied)
(not supplied)
Optical digital cord
(not supplied)
Remove jack cap
before connecting
(not supplied)
Remove jack cap
before connecting
or
to coaxial or optical digital input
to audio input
continued
Click on the first or last page to see other DVP-NS300 service manuals if exist.