Read Sony DVP-NC800H Service Manual online
1-4
DVP-NC800H
15
US
H
oo
kups
kups
Step 2: Connecting the Video Cords/HDMI Cords
Connect this player to your TV monitor, projector, or audio component such as an AV amplifier
(receiver) using a video cord. Select one of the patterns
(receiver) using a video cord. Select one of the patterns
A through D, according to the input
jack on your TV monitor, projector, or audio component.
In order to view progressive signal (480p) pictures with a compatible TV, projector, or monitor,
you must use pattern
In order to view progressive signal (480p) pictures with a compatible TV, projector, or monitor,
you must use pattern
C. Select pattern D when connecting to a TV, projector, or audio
component equipped with HDMI input.
A
VIDEO
AUDIO
INPUT
L
R
C
P
R
P
B
Y
COMPONENT
VIDEO IN
B
INPUT
S VIDEO
D
HDMI IN
Audio/video
cord
(supplied)
cord
(supplied)
l
: Signal flow
S VIDEO cord
(not supplied)
(not supplied)
(yellow)
TV, projector, or
audio component
audio component
CD/DVD player
TV, projector, or
audio component
audio component
(green)
Component
video cord
(not supplied)
video cord
(not supplied)
TV, projector, or
audio component
audio component
(red)
(blue)
(yellow)
to LINE OUT (VIDEO)
to COMPONENT
VIDEO OUT
VIDEO OUT
to S VIDEO OUT
(green)
(blue)
(red)
TV, projector, or
audio component
audio component
HDMI cord
(not supplied)
(not supplied)
to HDMI OUT
,continued
16
US
A
Video input jack
You will enjoy standard quality images.
B
S VIDEO input jack
You will enjoy high quality images.
C
Component video input jacks
(Y, P
B
, P
R
)
You will enjoy accurate color reproduction
and high quality images.
If your TV accepts progressive 480p format
signals, use this connection and set
“PROGRESSIVE (COMPONENT OUT
ONLY)” in “SCREEN SETUP” to “ON”
(page 57) to output progressive signals.
and high quality images.
If your TV accepts progressive 480p format
signals, use this connection and set
“PROGRESSIVE (COMPONENT OUT
ONLY)” in “SCREEN SETUP” to “ON”
(page 57) to output progressive signals.
D
HDMI/DVI input jack
Use a certified Sony HDMI cord to enjoy
high quality digital picture and sound through
the HDMI OUT jack.
high quality digital picture and sound through
the HDMI OUT jack.
When connecting to a Sony TV that is
compatible with the CONTROL FOR HDMI
function, see page 17.
compatible with the CONTROL FOR HDMI
function, see page 17.
When connecting to the HDMI OUT jack
Follow the steps below. Improper handling
may damage the HDMI OUT jack and
the connector.
Follow the steps below. Improper handling
may damage the HDMI OUT jack and
the connector.
1
Carefully align the HDMI OUT jack on
the back of the player and the HDMI
connector by checking their shapes.
Make sure the connector is not upside
down or tilted.
the back of the player and the HDMI
connector by checking their shapes.
Make sure the connector is not upside
down or tilted.
2
Insert the HDMI connector straight into
the HDMI OUT jack.
Do not bend or apply force to the HDMI
connector.
the HDMI OUT jack.
Do not bend or apply force to the HDMI
connector.
To connect to a TV with DVI input
Use an HDMI-DVI converter cord (not
supplied). The DVI jack will not accept any
audio signals, so you have to use another
audio connection in addition to this
connection (page 18). Furthermore, you
cannot connect the HDMI OUT jack to DVI
jacks that are not HDCP compliant (e.g., DVI
jacks on PC displays).
Use an HDMI-DVI converter cord (not
supplied). The DVI jack will not accept any
audio signals, so you have to use another
audio connection in addition to this
connection (page 18). Furthermore, you
cannot connect the HDMI OUT jack to DVI
jacks that are not HDCP compliant (e.g., DVI
jacks on PC displays).
When connecting to a standard 4:3 screen
TV
Depending on the disc, the image may not fit
your TV screen. To change the aspect ratio,
see page 56.
TV
Depending on the disc, the image may not fit
your TV screen. To change the aspect ratio,
see page 56.
Notes
• Do not connect a VCR, etc., between your TV and
the player. If you pass the player signals via the
VCR, you may not receive a clear image on the
TV screen. If your TV has only one audio/video
input jack, connect the player to this jack.
VCR, you may not receive a clear image on the
TV screen. If your TV has only one audio/video
input jack, connect the player to this jack.
• If the picture appears too white when you are
using
A or B connection, set “BLACK LEVEL”
in “SCREEN SETUP” to “OFF” (page 57).
• Be sure to disconnect the HDMI cord when
moving the player.
• Do not apply too much pressure to the cabinet
wall, if you place the player on the cabinet with
the HDMI cord connected. It may damage the
HDMI OUT jack or the HDMI cord.
the HDMI cord connected. It may damage the
HDMI OUT jack or the HDMI cord.
• When connecting or disconnecting, do not screw
in or rotate the HDMI connector.
Connector is
upside down
upside down
Not straight
VCR
CD/DVD player
TV
Connect
directly
directly
17
US
H
oo
kups
kups
About the CONTROL FOR HDMI
functions for ‘BRAVIA Sync’ (for
HDMI connections only)
functions for ‘BRAVIA Sync’ (for
HDMI connections only)
By connecting to Sony components that are
compatible with the CONTROL FOR HDMI
function with an HDMI cord (not supplied), you can
enjoy
the following features:
• One-Touch Play (page 24)
• System-Power Off
compatible with the CONTROL FOR HDMI
function with an HDMI cord (not supplied), you can
enjoy
the following features:
• One-Touch Play (page 24)
• System-Power Off
When you turn the TV off by using the
[/1 button
on the TV’s remote, the components compatible
with CONTROL FOR HDMI function turn off
automatically.
with CONTROL FOR HDMI function turn off
automatically.
To prepare for the ‘BRAVIA Sync’ features
Set “CONTROL FOR HDMI” to “ON” in “HDMI
SETUP” (page 62). For details on TV setting, refer
to the operating instructions supplied with the TV.
SETUP” (page 62). For details on TV setting, refer
to the operating instructions supplied with the TV.
Note
Depending on the connected component, the
CONTROL FOR HDMI function may not work.
Refer to the operating instructions supplied with the
component.
CONTROL FOR HDMI function may not work.
Refer to the operating instructions supplied with the
component.
18
US
Step 3: Connecting the Audio Cords
Select one of the following patterns
A or B, according to the input jack on your TV monitor,
projector, or audio component such as an AV amplifier (receiver).
This will enable you to listen to sound.
This will enable you to listen to sound.
z Hint
For correct speaker location, see the operating instructions supplied with the connected components.
For correct speaker location, see the operating instructions supplied with the connected components.
VIDEO
AUDIO
INPUT
L
R
B
A
Audio component
with a decoder
with a decoder
(red)
TV, projector, or
audio component
audio component
Audio/video
cord (supplied)
cord (supplied)
: Signal flow
Coaxial digital cord
(not supplied)
(not supplied)
to LINE OUT L/R (AUDIO)
Rear (L)
CD/DVD player
(white)
(yellow)
*
(yellow)
*
(white)
(red)
[Speakers]
Front (L)
[Speakers]
to coaxial or optical/
HDMI digital input
HDMI digital input
Rear (R)
Front (R)
Subwoofer
Center
* The yellow plug is used for video signals (page 15).
or
Optical digital cord
(not supplied)
Remove jack cap
before connecting
(not supplied)
Remove jack cap
before connecting
or
HDMI cord (not supplied)
to DIGITAL OUT (COAXIAL or
OPTICAL)/HDMI OUT
OPTICAL)/HDMI OUT
Click on the first or last page to see other DVP-NC800H service manuals if exist.