DVP-NC800H - Sony DVD Service Manual (repair manual). Page 7

Read Sony DVP-NC800H Service Manual online

1-2
DVP-NC800H
7
US
Notes
• Notes about DVD+RWs/DVD+Rs/DVD+Rs 
DL, DVD-RWs/DVD-Rs/DVD-Rs DL or CD-
Rs/CD-RWs
Some DVD+RWs/DVD+Rs/DVD+Rs DL, 
DVD-RWs/DVD-Rs/DVD-Rs DL, or CD-Rs/
CD-RWs cannot be played on this player due to 
the recording quality or physical condition of the 
disc, or the characteristics of the recording device 
and authoring software.
The disc will not play if it has not been correctly 
finalized. For more information, refer to the 
operating instructions for the recording device. 
Note that some playback functions may not work 
with some DVD+RWs/DVD+Rs/DVD+Rs DL, 
even if they have been correctly finalized. In this 
case, view the disc by normal playback. Also 
some DATA CDs/DATA DVDs created in Packet 
Write format cannot be played.
• Music discs encoded with copyright protection 
technologies
This product is designed to playback discs that 
conform to the Compact Disc (CD) standard.
Recently, various music discs encoded with 
copyright protection technologies are marketed 
by some record companies. Please be aware that 
among those discs, there are some that do not 
conform to the CD standard and may not be 
playable by this product.
• For player that cannot play images that 
contain a copy protection only
Images in DVD-VR mode with CPRM* 
protection may not be played if they contain a 
copy protection signal, “Copyright lock” appears 
on the screen.
* CPRM (Content Protection for Recordable 
Media) is a coding technology that protects the 
copyright of images.
• Note on DualDiscs
A DualDisc is a two sided disc product which 
mates DVD recorded material on one side with 
digital audio material on the other side.
However, since the audio material side does not 
conform to the Compact Disc (CD) standard, 
playback on this product is not guaranteed.
Note on playback operations of 
DVDs and VIDEO CDs
Some playback operations of DVDs and 
VIDEO CDs may be intentionally set by 
software producers. Since this player plays 
DVDs and VIDEO CDs according to the disc 
contents the software producers designed, 
some playback features may not be available. 
Also, refer to the instructions supplied with 
the DVDs or VIDEO CDs.
Copyrights
This product incorporates copyright 
protection technology that is protected by 
U.S. patents and other intellectual property 
rights. Use of this copyright protection 
technology must be authorized by 
Macrovision, and is intended for home and 
other limited viewing uses only unless 
otherwise authorized by Macrovision. 
Reverse engineering or disassembly is 
prohibited.
8
US
Guide to Parts and Controls
For more information, see the pages indicated in parentheses.
Front panel
A [/1 (on/standby) button (24)
B HDMI* (High-Definition Multimedia 
Interface) indicator (16, 61, 62) 
Lights up when the HDMI OUT jack is 
correctly connected to a HDCP (High-
bandwidth Digital Content Protection) 
compliant device with HDMI or DVI 
(Digital Visual Interface) input.
C DISC 1-5 buttons (25)
D N (play) button (24)
E x (stop) button (25)
F ./> (previous/next) buttons (40)
G Z (open/close) button (24)
H DISC SKIP button (26)
I  (remote sensor) (20)
J EXCHANGE button (26)
K Disc tray (24)
L Front panel display (9)
* This DVD player incorporates High-Definition 
Multimedia Interface (HDMI™) technology.
“HDMI, the HDMI logo and High-Definition 
Multimedia Interface are trademarks or registered 
trademarks of HDMI Licensing LLC.”
Rear panel
A HDMI OUT (High-Definition 
Multimedia Interface out) jack (15)
B DIGITAL OUT (OPTICAL) jack (18)
C DIGITAL OUT (COAXIAL) jack (18)
D LINE OUT L/R (AUDIO) jacks (18)
E LINE OUT (VIDEO) jack (15)
F S VIDEO OUT jack (15)
G COMPONENT VIDEO OUT jacks 
(15)
9
US
Front panel display
When playing back a DVD
When playing back a VIDEO CD with Playback Control (PBC) (27)
When playing back a CD, DATA CD (MP3 audio), DATA DVD (MP3 audio), or VIDEO CD 
(without PBC)
* When playing DATA DVDs, the DVD indicator is displayed.
When playing VIDEO CDs (without PBC), the VCD indicator is displayed.
Hint
You can adjust the lighting of the front panel 
display by setting “DIMMER” in “CUSTOM 
SETUP.” (page 58)
Playing time of the 
current title (29)
Lights up when you can 
change the angle (25)
Lights up during Repeat Play (32)
Playing 
status
All Disc Repeat 
mode (32)
Current 
disc
Disc type
Disc numbers (25)
Current playing time (28)
Playing status
Lights up during A-B Repeat Play (33)
Current disc
Disc type
Disc numbers (25)
Current track (28)
Lights up during Repeat Play (32)
Playing 
status
Current playing time (28)
Current 
disc
Disc type
*
Disc numbers (25)
All Discs 
Repeat 
mode (32)
,continued
10
US
Remote
A TV [/1 (on/standby) button (21)
B Z OPEN/CLOSE button (25)
C Number buttons (27)
The number 5 button has a tactile dot.*
D CLEAR button (31)
E TOP MENU button (27)
F C/X/x/c buttons (25)
G O RETURN button (26)
H
/
 REPLAY/STEP/
ADVANCE/STEP buttons (25, 41)
I ./> PREV/NEXT (previous/
next) buttons (25)
J
m/M
 SCAN/SLOW 
buttons (40)
K ZOOM button (25, 50)
L SLOW PLAY/FAST PLAY buttons 
(25)
M AUDIO button (44)
N SUBTITLE button (25, 50)
O [/1 (on/standby) button (24)
P VOL (volume) +/– buttons (21)
The + button has a tactile dot.*
Q TV/VIDEO button (21)
R PICTURE NAVI (picture navigation) 
button (43, 49)
S TIME/TEXT button (28)
T MENU button (27)
U ENTER button (22)
V DISPLAY button (11)
W H PLAY button (24)
The 
H button has a tactile dot.*
X x STOP button (25)
Y X PAUSE button (25)
Z DISC SKIP button (46)
wj ANGLE button (25)
* Use the tactile dot as a reference when operating 
the player.
Page of 82
Display

Click on the first or last page to see other DVP-NC800H service manuals if exist.