Read Sony DVP-NC685V Service Manual online
1-7
30
Playing Discs
Playing Discs
Depending on the DVD or VIDEO CD, some
operations may be different or restricted.
operations may be different or restricted.
Refer to the operating instructions supplied
with your disc.
with your disc.
1
Turn on your TV.
2
Press
[/1.
The player turns on.
3
Switch the input selector on your
TV so that the signal from the
TV so that the signal from the
player appears on the TV screen.
◆ When using an amplifier (receiver)
Turn on the amplifier (receiver) and
select the appropriate channel so that you
can hear sound from the player.
Turn on the amplifier (receiver) and
select the appropriate channel so that you
can hear sound from the player.
4
Press
A on the player, and place a
disc on the disc tray.
To place other discs on the tray, press
DISC SKIP and place the discs in the
order you want to play them.
Each time you press DISC SKIP, the disc
tray turns so you can place the discs on
the empty compartments. The player
plays from the last disc placed on the tray.
DISC SKIP and place the discs in the
order you want to play them.
Each time you press DISC SKIP, the disc
tray turns so you can place the discs on
the empty compartments. The player
plays from the last disc placed on the tray.
5
Press
H.
The disc tray closes, and the player starts
playback (continuous play). Adjust the
volume on the TV or the amplifier
(receiver).
Depending on the disc, a menu may
appear on the TV screen. For DVD
VIDEOs, see page 34. For VIDEO CDs,
see page 36.
playback (continuous play). Adjust the
volume on the TV or the amplifier
(receiver).
Depending on the disc, a menu may
appear on the TV screen. For DVD
VIDEOs, see page 34. For VIDEO CDs,
see page 36.
To turn off the player
Press
[/1. The player enters standby mode.
z
Hint
You can have the player turn off automatically
whenever you leave it in stop mode for more than
30 minutes. To turn on this function, set “AUTO
POWER OFF” in “CUSTOM SETUP” to “ON”
(page 73).
whenever you leave it in stop mode for more than
30 minutes. To turn on this function, set “AUTO
POWER OFF” in “CUSTOM SETUP” to “ON”
(page 73).
Note
Super Audio CD audio signals are not output from
the digital jack.
the digital jack.
[
/
1
H
A
[
/
1
Z
H
DISC SKIP
DISC SKIP
With the playback
side facing down
side facing down
Disc
compartment
number
compartment
number
31
Pl
ay
in
in
g Di
sc
s
Additional operations
*
For DVD VIDEOs and DVD-RWs/DVD-Rs
only.
only.
** For DVD VIDEOs and DVD-RWs/DVD-Rs or
DVD+RWs only.
z
Hints
• The Instant Replay function is useful when you
want to review a scene or dialog that you missed.
• The Instant Search function is useful when you
want to pass over a scene that you don’t want to
watch.
watch.
• Before loading the discs, a disc number indicator
of an empty compartment may be lit.
Note
You may not be able to use the Instant Replay
function with some scenes.
function with some scenes.
To
Operation
Select a disc
Press DISC SELECT
1–5 on the player
1–5 on the player
Stop
Press
x
Pause
Press
X
Resume play after
pause
pause
Press
X or H
Go to the next disc
Press DISC SKIP
Go to the next chapter,
track, or scene in
continuous play mode
track, or scene in
continuous play mode
Press
> on the
remote, or briefly
press
press
> on the
player.
Go back to the
previous chapter,
track, or scene in
continuous play mode
previous chapter,
track, or scene in
continuous play mode
Press
. on the
remote, or briefly
press
press
. on the
player.
Stop play and remove
the disc
the disc
Press
Z
Replay the previous
scene*
scene*
Press
INSTANT REPLAY
during playback
INSTANT REPLAY
during playback
Z
.
/
>
H
INSTANT
REPLAY
REPLAY
x
DISC SKIP
X
INSTANT
SEARCH
SEARCH
A
DISC SELECT
H X
x
.
/
>
LOAD
DISC SKIP
Briefly fast forward
the current scene**
the current scene**
Press
INSTANT SEARCH
during playback
INSTANT SEARCH
during playback
Check if a disc is in
the disc compartment
the disc compartment
Press LOAD on the
player.
The disc number
indicators on the front
panel display (1–5)
light up.
player.
The disc number
indicators on the front
panel display (1–5)
light up.
To
Operation
c
continued
32
Replacing discs while playing a
disc (EXCHANGE)
disc (EXCHANGE)
You can open the disc tray while playing a
disc so that you can check which discs are to
be played next and replace discs without
interrupting playback of the current disc.
disc so that you can check which discs are to
be played next and replace discs without
interrupting playback of the current disc.
1
Press EXCHANGE.
The disc tray opens and two disc
compartments appear. Even if the player
is playing a disc, it doesn’t stop playing.
compartments appear. Even if the player
is playing a disc, it doesn’t stop playing.
2
Replace the discs in the
compartments with new ones.
compartments with new ones.
3
Press DISC SKIP.
The disc tray turns and another two disc
compartments appear.
compartments appear.
4
Replace the discs in the
compartments with new ones.
compartments with new ones.
5
Press EXCHANGE.
The disc tray closes.
z
Hint
While the disc tray is open,
– If the playback of the current disc end, the player
– If the playback of the current disc end, the player
stops playing. If the disc is played in One Disc
Repeat Play mode (page 43), the current disc
starts playing again.
Repeat Play mode (page 43), the current disc
starts playing again.
– In All Discs Shuffle Play mode (page 42), titles/
tracks/chapters are reshuffled only on the current
disc.
disc.
– In Program Play mode (page 40), the titles/tracks/
chapters only on the current disc are played.
Note
Do not push the disc tray to close in step 5, as you
may damage the player.
may damage the player.
Locking the disc tray (Child
Lock)
Lock)
You can lock the disc tray to prevent children
from opening it.
from opening it.
When the player is in standby mode, press
O RETURN, ENTER, and then [/1 on the
remote.
O RETURN, ENTER, and then [/1 on the
remote.
The player turns on and “LOCKED” appears
on the front panel display.
The
on the front panel display.
The
A and EXCHANGE buttons on the
player and the
Z button on the remote do not
work while the Child Lock is set.
To unlock the disc tray
When the player is in standby mode, press
O RETURN, ENTER, and then [/1 again.
O RETURN, ENTER, and then [/1 again.
Note
Even if you select “RESET” under “SETUP” in the
Control Menu (page 71), the disc tray remains
locked.
Control Menu (page 71), the disc tray remains
locked.
EXCHANGE DISC SKIP
DISC SKIP
ENTER
O
RETURN
[
/
1
33
Pl
ay
in
in
g Di
sc
s
Resuming Playback From
the Point Where You
Stopped the Disc
the Point Where You
Stopped the Disc
(Multi-disc
Resume)
The player stores the point where you stopped
the disc for up to 6 discs and resumes
playback the next time you insert the same
disc. The player remembers the stopped point
of the disc even after you play other discs in
the disc tray. When you store a resume
playback point for the 7th disc, the resume
playback point for the first disc is deleted.
the disc for up to 6 discs and resumes
playback the next time you insert the same
disc. The player remembers the stopped point
of the disc even after you play other discs in
the disc tray. When you store a resume
playback point for the 7th disc, the resume
playback point for the first disc is deleted.
1
While playing a disc, press
x to
stop playback.
“RESUME” appears on the front panel
display.
display.
2
Press
H.
The player starts playback from the point
where you stopped the disc in step 1.
where you stopped the disc in step 1.
z
Hints
• To play from the beginning of the disc, press
x
twice, then press
H.
• For DVD-RWs in VR mode, CDs, Super Audio
CDs, and DATA CDs, the player remembers the
resume playback point for the current disc.
The point where you stopped is cleared when:
– you press DISC SKIP or DISC SELECT.
– you opened the disc tray.
– you disconnect the power cord.
– the player enters standby mode (DATA CD
resume playback point for the current disc.
The point where you stopped is cleared when:
– you press DISC SKIP or DISC SELECT.
– you opened the disc tray.
– you disconnect the power cord.
– the player enters standby mode (DATA CD
only).
• To turn off the Multi-disc Resume function, set
“MULTI-DISC RESUME” in “CUSTOM
SETUP” to “OFF” (page 74). Playback restarts at
the resume point only for the current disc in the
player.
SETUP” to “OFF” (page 74). Playback restarts at
the resume point only for the current disc in the
player.
Notes
• “MULTI-DISC RESUME” in “CUSTOM
SETUP” must be set to “ON” (default) for this
function to work (page 74).
function to work (page 74).
• The resume playback point for the current disc is
cleared when:
– you change the play mode.
– you change the settings on the Setup Display.
– you change the play mode.
– you change the settings on the Setup Display.
• Resume Play does not work during Shuffle Play
and Program Play.
• This function may not work with some discs.
• If “MULTI-DISC RESUME” in “CUSTOM
• If “MULTI-DISC RESUME” in “CUSTOM
SETUP” is set to “ON” and you playback a
recorded disc such as DVD-RW, the player may
playback other recorded discs from the same
resume point. To play from the beginning, press
x twice and then press H.
recorded disc such as DVD-RW, the player may
playback other recorded discs from the same
resume point. To play from the beginning, press
x twice and then press H.
H
x
Click on the first or last page to see other DVP-NC685V service manuals if exist.