Read Sony DVP-NC685V Service Manual online
1-6
26
Step 5: Connecting the Power Cord
Plug the player and TV power cords into an AC outlet.
Step 6: Quick Setup
Follow the steps below to make the minimum number of basic adjustments for using the player.
To skip an adjustment, press
To skip an adjustment, press
>. To return to the previous adjustment, press ..
1
Turn on the TV.
2
Press
[
/
1.
Press PROGRESSIVE on the front panel
only if you have made video connection
C (page 17) and wish to view
progressive video signals. The
PROGRESSIVE indicator lights up in
blue when the player outputs progressive
signal.
only if you have made video connection
C (page 17) and wish to view
progressive video signals. The
PROGRESSIVE indicator lights up in
blue when the player outputs progressive
signal.
3
Switch the input selector on your
TV so that the signal from the
player appears on the TV screen.
“Press [ENTER] to run QUICK SETUP”
appears at the bottom of the screen. If this
message does not appear, select
“QUICK” under “SETUP” in the Control
Menu to run Quick Setup (page 71).
appears at the bottom of the screen. If this
message does not appear, select
“QUICK” under “SETUP” in the Control
Menu to run Quick Setup (page 71).
4
Press ENTER without inserting a
disc.
disc.
The Setup Display for selecting the
language used in the on-screen display
appears.
language used in the on-screen display
appears.
5
Press X/x to select a language.
The player uses the language selected
here to display the menu and subtitles as
well.
here to display the menu and subtitles as
well.
.
/
>
X
/
x
ENTER
[
/
1
LANGUAGE SETUP
OSD:
MENU:
AUDIO:
SUBTITLE:
MENU:
AUDIO:
SUBTITLE:
FRENCH
ENGLISH
ENGLISH
ENGLISH
SPANISH
PORTUGUESE
27
H
ook
up
s
s
6
Press ENTER.
The Setup Display for selecting the
aspect ratio of the TV to be connected
appears.
aspect ratio of the TV to be connected
appears.
7
Press X/x to select the setting that
matches your TV type.
matches your TV type.
◆ If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
• 4:3 LETTER BOX or 4:3 PAN SCAN
(page 72)
◆ If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
• 16:9 (page 72)
standard TV with a wide-screen mode
• 16:9 (page 72)
8
Press ENTER.
The Setup Display for selecting the type
of jack used to connect your amplifier
(receiver) appears.
of jack used to connect your amplifier
(receiver) appears.
9
Press X/x to select the type of jack
(if any) you are using to connect to
(if any) you are using to connect to
an amplifier (receiver), then press
ENTER.
Choose the item that matches the audio
connection you selected on pages 21 to
24 (
connection you selected on pages 21 to
24 (
through
).
• If you connect just a TV and nothing
else, select “NO.” Quick Setup is
finished and connections are complete.
finished and connections are complete.
• Select “LINE OUTPUT L/R
(AUDIO).” Quick Setup is finished and
connections are complete.
connections are complete.
• Select “DIGITAL OUTPUT.” The Setup
Display for “DOLBY DIGITAL” appears.
or both
and
• Select “DIGITAL & 5.1CH OUTPUT.”
The Setup Display for “DOLBY
DIGITAL” appears.
DIGITAL” appears.
10
Press X/x to select the type of
Dolby Digital signal you wish to
send to your amplifier (receiver).
Choose the signal that matches the audio
connection you selected on pages 22 to
24 (
connection you selected on pages 22 to
24 (
through ).
• D-PCM (page 76)
• DOLBY DIGITAL (only if the
amplifier (receiver) has a Dolby Digital
decoder) (page 76)
decoder) (page 76)
11
Press ENTER.
“DTS” is selected.
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
SCREEN SAVER:
BLACK LEVEL:
BLACK LEVEL
BLACK LEVEL
(COMPONENT OUT)
:
BACKGROUND:
4:3 LETTER BOX
4:3 PAN SCAN
4:3 LETTER BOX
ON
16:9
YES
NO
Is this player connected to an amplifier
(receiver) ? Select the type of jack you
are using.
(receiver) ? Select the type of jack you
are using.
LINE OUTPUT L/R (AUDIO)
DIGITAL OUTPUT
DIGITAL & 5.1CH OUTPUT
DIGITAL OUTPUT
DIGITAL & 5.1CH OUTPUT
A
D
A
B-1
C-1
B-2
C-2
D-2
D-1
D-1
D-2
B
D
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
OFF
STANDARD
AUDIO FILTER:
SHARP
ON
DOWNMIX:
DOLBY SURROUND
D-PCM
D-PCM
D-PCM
48kHz/96kHz PCM:
DTS:
DOLBY DIGITAL
B-2
C-2
D-2
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
OFF
STANDARD
AUDIO FILTER:
SHARP
ON
DOWNMIX:
DOLBY SURROUND
D-PCM
D-PCM
D-PCM
48kHz/96kHz PCM:
DTS
DTS:
D-PCM
c
continued
28
12
Press X/x to select the type of
DTS signal sent to your amplifier
(receiver).
(receiver).
Choose the item that matches the audio
connection you selected on pages 22 to
24 (
connection you selected on pages 22 to
24 (
through ).
• D-PCM (page 76)
• DTS (only if the amplifier (receiver)
has a DTS decoder) (page 76)
13
Press ENTER.
◆ When “DIGITAL OUTPUT” is selected
in step 9
• Quick Setup is finished and
in step 9
• Quick Setup is finished and
connections are complete.
◆ When “DIGITAL & 5.1CH OUTPUT” is
selected in step 9
• The Setup Display for “SPEAKER
selected in step 9
• The Setup Display for “SPEAKER
SETUP” appears.
14
Press X/x to select the size of the
center speaker.
If no center speaker is connected, select
“NONE” (page 77).
“NONE” (page 77).
15
Press ENTER.
“REAR” is selected.
16
Press X/x to select the size of the
rear speakers.
If no rear speaker is connected, select
“NONE.”
“SIDE” and “REAR” refer to the speaker
position relative to your listening
position (page 77).
“NONE.”
“SIDE” and “REAR” refer to the speaker
position relative to your listening
position (page 77).
17
Press ENTER.
“SUBWOOFER” is selected.
18
Press X/x to select whether or
not you have connected a
subwoofer.
19
Press ENTER.
Quick Setup is finished. All connections
and setup operations are complete.
and setup operations are complete.
Enjoying the surround sound
effects
effects
To enjoy the surround sound effects of this
player or your amplifier (receiver), set the
following items as described below for the
audio connection you selected on pages 22 to
24 (
player or your amplifier (receiver), set the
following items as described below for the
audio connection you selected on pages 22 to
24 (
through
). Each of these is the
default setting and does not need to be adjusted
when you first connect the player. Refer to
page 70 for using the Setup Display.
when you first connect the player. Refer to
page 70 for using the Setup Display.
Audio Connection (pages 21 to 24)
• No additional settings are needed.
• Set “DOWNMIX” to “DOLBY
SURROUND” (page 75).
• Set “DOWNMIX” to “DOLBY
SURROUND” (page 75).
• Set “DIGITAL OUT” to “ON” (page 75).
B
D
B-2
C-2
D-2
SPEAKER SETUP (DVD)
SIZE:
DISTANCE:
LEVEL(FRONT):
LEVEL(REAR):
DISTANCE:
LEVEL(FRONT):
LEVEL(REAR):
OFF
TEST TONE:
FRONT:
CENTER:
CENTER:
NONE
SMALL
LARGE
LARGE
REAR:
SUBWOOFER:
SUBWOOFER:
To set, press , then .
ENTER
LARGE
SPEAKER SETUP
(DVD)
SIZE:
DISTANCE:
LEVEL(FRONT):
LEVEL(REAR):
DISTANCE:
LEVEL(FRONT):
LEVEL(REAR):
OFF
TEST TONE:
FRONT:
CENTER:
CENTER:
LARGE
REAR:
SUBWOOFER:
SUBWOOFER:
LARGE(REAR)
LARGE
LARGE(SIDE)
LARGE(REAR)
SPEAKER SETUP (DVD)
SIZE:
DISTANCE:
LEVEL(FRONT):
LEVEL(REAR):
DISTANCE:
LEVEL(FRONT):
LEVEL(REAR):
OFF
TEST TONE:
FRONT:
CENTER:
CENTER:
LARGE
LARGE
REAR:
SUBWOOFER:
SUBWOOFER:
To set, press , then .
To quit press
To quit press
ENTER
ENTER
SETUP
DISPLAY
DISPLAY
YES
YES
NONE
LARGE(REAR)
B
D
A
B-1
C-1
B-2
C-2
D-2
29
H
ook
up
s
s
• Set “DISTANCE,” “LEVEL (FRONT),”
and “LEVEL (REAR)” according to the
connected speakers (page 78).
connected speakers (page 78).
z
Hints
• For connections
If the sound distorts even when the volume is
turned down, set “AUDIO ATT” to “ON” (page
75).
turned down, set “AUDIO ATT” to “ON” (page
75).
• For connections
Set “48kHz/96kHz PCM” to “96kHZ/24bit” only
if you connect an amplifier (receiver) that
conforms to the 96 kHz sampling frequency (page
76).
if you connect an amplifier (receiver) that
conforms to the 96 kHz sampling frequency (page
76).
• The speaker size you set in steps 14 through 18
will also adjust the Super Audio CD speaker size
of “SPEAKER SETUP.” If you want to change
the speaker size for Super Audio CDs, you can set
it in “SPEAKER SETUP” (page 77).
of “SPEAKER SETUP.” If you want to change
the speaker size for Super Audio CDs, you can set
it in “SPEAKER SETUP” (page 77).
D-1
B-1
C-1
D-1
B-2
C-2
D-2
Click on the first or last page to see other DVP-NC685V service manuals if exist.