DVP-K88P, DVP-K88PM - Sony DVD Service Manual (repair manual). Page 17

1-12

When you connect a stereo TV or 2 front 
speakers, TVS (TV Virtual Surround) lets 
you enjoy surround sound effects by using 
sound imaging to create virtual rear speakers 
from the sound of the front speakers (L: left, 
R: right) without using actual rear speakers. 
TVS was developed by Sony to produce 
surround sound for home use using just a 
stereo TV.
This only works when playing a multichannel 
Dolby audio soundtrack. Furthermore, if the 
player is set up to output the signal from the 
DIGITAL OUT (OPTICAL or COAXIAL) 
jack, the surround effect will only be heard 
when “DOLBY DIGITAL” is set to 
“D-PCM” and “MPEG” is set to “PCM” in 
“AUDIO SETUP” (page 73).

The following display appears.

See the explanations given for each item 
in the following section.
• TVS DYNAMIC THEATER
• TVS DYNAMIC
• TVS  WIDE
• TVS NIGHT
• TVS STANDARD

To cancel the setting
Select “OFF” in step 2.

◆TVS DYNAMIC THEATER
Creates one set of LARGE virtual rear 
speakers and virtual subwoofer from the 
sound of the front speakers (L, R) without 
using actual rear speakers and subwoofer 
(shown below). 
This mode is effective when the distance 
between the front L and R speakers is short, 
such as with built-in speakers on a stereo TV.

◆TVS DYNAMIC
Creates one set of virtual rear speakers from 
the sound of the front speakers (L, R) without 
using actual rear speakers (shown below).
This mode is effective when the distance 
between the front L and R speakers is short, 
such as with built-in speakers on a stereo TV.

◆TVS WIDE
Creates five sets of virtual rear speakers from 
the sound of the front speakers (L, R) without 
using actual rear speakers (shown below).
This mode is effective when the distance 
between the front L and R speakers is short, 
such as with built-in speakers on a stereo TV.

SUR

TVS DYNAMIC THEATER

TV

Sub
woofer

TV

TV

,continued

◆TVS NIGHT
Large sounds, such as explosions, are 
suppressed, but the quieter sounds are 
unaffected. This feature is useful when you 
want to hear the dialogue and enjoy the 
surround sound effects of “TVS WIDE” at 
low volume.
◆TVS STANDARD
Creates three sets of virtual rear speakers 
from the sound of the front speakers (L, R) 
without using actual rear speakers (shown 
below). Use this setting when you want to use 
TVS with 2 separate speakers.

• When the playing signal does not contain a signal 

for the rear speakers, the surround effects cannot 
be heard.

• When you select one of the TVS modes, turn off 

the surround setting of the connected TV or 
amplifier (receiver).

• Make sure that your listening position is between 

and at an equal distance from your speakers, and 
that the speakers are located in similar 
surroundings.

• Not all discs will respond to the “TVS NIGHT” 

function in the same way.

• The TVS effects do not work when using the Fast 

Play or Slow Play functions, even though you can 
change the TVS modes.

L: Front speaker (left)
R: Front speaker (right)

: Virtual speaker

L

R

If various angles (multi-angles) for a scene 
are recorded on the DVD VIDEO, “

” 

appears in the front panel display. This means 
that you can change the viewing angle.

The number of the angle appears on the 
display.

The scene changes to the selected angle.

Depending on the DVD VIDEO, you may not be 
able to change the angles even if multi-angles are 
recorded on the DVD VIDEO.

If subtitles are recorded on the discs, you can 
change the subtitles or turn them on and off 
whenever you want while playing the discs.

The following display appears.

◆ When playing a DVD VIDEO
Select the language.
Depending on the DVD VIDEO, the 
choice of language varies.
When 4 digits are displayed, they 
indicate a language code. See “Language 
Code List” on page 80 to see which 
language the code represents.
◆ When playing in DVD-VR mode
Select “ON.”
◆ When playing a DATA CD (DivX video) 
or DATA DVD (DivX video)
Select the displayed language.

(angle)

2

(subtitle)

1:ENGLISH

,continued

To turn off the subtitles
Select “OFF” in step 2.

• Depending on the DVD VIDEO, you may not be 

able to change the subtitles even if multilingual 
subtitles are recorded on it. You also may not be 
able to turn them off.

• You can change the subtitles if the DivX video 

file has an “.AVI” or “.DIVX” extension and 
contains subtitle information within the same file.

• While playing a disc with subtitles, the subtitle 

may disappear when you press FAST PLAY or 
SLOW PLAY button.

You can adjust the video signal of the DVD, 
VIDEO CD, DATA CD/DATA DVD in 
JPEG format, or DATA CD/DATA DVD 
containing DivX video files from the player 
to obtain the picture quality you want. Choose 
the setting that best suits the programme you 
are watching. When you select “MEMORY,” 
you can make further adjustments to each 
element of the picture (colour, brightness, 
etc.).

The Control Menu appears.

X/x to select 

The options for “CUSTOM PICTURE 
MODE” appear.

DISPLAY

RETURN

ENTER

DVD VIDEO

DYNAMIC 1 

STANDARD

DYNAMIC 2

CINEMA 2

CINEMA 1

MEMORY
STANDARD