Read Sony DVP-K350 Service Manual online
1-4
16
Operation Sound Effects (Sound Feedback)
The player beeps when the following operations are
performed.
The default setting of the Sound Feedback function is set
to off.
performed.
The default setting of the Sound Feedback function is set
to off.
Operation
Operation sound
Power is turned on
One beep
Power is turned off
Two beeps
H
is pressed
One beep
X
is pressed
Two beeps
Playback is stopped
One long beep
Operation is not possible
Three beeps
In karaoke mode, the player beeps when the following
operations are performed using buttons on the player or
on the remote. For details about the karaoke operations,
see page 45.
operations are performed using buttons on the player or
on the remote. For details about the karaoke operations,
see page 45.
Operation
Operation sound
When you turn the karaoke
mode on
mode on
One beep
When you turn the karaoke
mode off
mode off
Two beeps
When you turn on:
One beep
KARAOKE PON,
VOCAL, VOCAL SUPPORT
VOCAL, VOCAL SUPPORT
When you turn off:
Two beeps
KARAOKE PON,
KARAOKE STAR, VOCAL,
VOCAL SUPPORT
KARAOKE STAR, VOCAL,
VOCAL SUPPORT
KEY CONTROL:
Two beeps
at the maximum
Three beeps
at the minimum
Three beeps
VOCAL SELECT (for DVDs):
1+2
1+2
Two beeps
1
One beep
2
One beep
VOCAL SELECT
(for CDs/VIDEO CDs/Super VCDs):
L+R
(for CDs/VIDEO CDs/Super VCDs):
L+R
Two beeps
STEREOO
ne beep
RESERVE:
When the player waits
for the next disc
When the player waits
for the next disc
Two beeps after one long beep (stop)
When all reserved titles
or tracks are finished
or tracks are finished
One long beep (stop)
EFECT MODE:
OFF
OFF
Two beeps
1, 2
One beep
X
!
1
4
7
2
5
8
0
3
6
9
@/1
1
Press
!
on the player, then press
@
/
1
on the
remote.
The power indicator lights up in green.
When there is a disc in the player, press A and remove
the disc. Then press A again to close the disc tray.
When there is a disc in the player, press A and remove
the disc. Then press A again to close the disc tray.
2
Pr ess and hold
X
on the player for more than two
seconds.
You will hear one beep and the Sound Feedback
function is turned on.
function is turned on.
To turn off the Sound Feedback Function
When there is no disc in the player, press and hold X on
the player for more than two seconds. You will hear two
beeps and the Sound Feedback function is turned of
the player for more than two seconds. You will hear two
beeps and the Sound Feedback function is turned of
A
f.
17
Depending on the DVD or VIDEO CD, some
operations may be different or restricted. Refer to the
instructions supplied with your disc.
operations may be different or restricted. Refer to the
instructions supplied with your disc.
1
Turn on your TV.
Turn on the TV and select the video input so that you
can view the pictures from this player.
can view the pictures from this player.
When using a receiver (amplifier)
Turn on the receiver (amplifier) and select the
appropriate position so that you can listen to the
sound from this player.
appropriate position so that you can listen to the
sound from this player.
2
Press
!
on the player.
The player enters standby mode and the power
indicator lights up in red.
indicator lights up in red.
3
Press
A
on the player, and place a disc on the disc
tray.
The player automatically turns on and the power
indicator lights up in green.
indicator lights up in green.
4
Press
H
.
The disc tray closes and the player starts playback
(continuous play). Adjust the volume on the TV or the
receiver (amplifier).
(continuous play). Adjust the volume on the TV or the
receiver (amplifier).
After following Step 4
x
When playing a DVD
A DVD menu or title menu may appear on the TV
screen (see page 21).
A DVD menu or title menu may appear on the TV
screen (see page 21).
x
When playing a VIDEO CD
A menu may appear on the TV screen depending on the
VIDEO CD. You can play the disc interactively,
following the instructions on the menu. (PBC Playback,
see page 22.)
A menu may appear on the TV screen depending on the
VIDEO CD. You can play the disc interactively,
following the instructions on the menu. (PBC Playback,
see page 22.)
Playing Discs
Playing Discs
This chapter describes how to play a
DVD/CD/VIDEO CD.
DVD/CD/VIDEO CD.
!
A
H
Power indicator
@
/
1
With the playback
1
4
7
2
5
8
0
3
6
9
side facing down
18
Additional operations
To
Operation
Stop
Press x
Pause
Press X
Resume play after pause
Press X or H
Go to the next chapter,
Press >
track or scene in
continuous play mode
continuous play mode
Go back to the preceding
Press .
chapter, track or scene in
continuous play mode
continuous play mode
Stop play and remove the
Press Z
disc
You can play discs in various modes such as Program Play
using the on-screen menu (Control Menu). For Control
Menu operations, see page 25.
using the on-screen menu (Control Menu). For Control
Menu operations, see page 25.
To turn on the player
Press ! on the player. The player enters standby mode
and the power indicator lights up in red.
Then press @/1 on the remote. The player turns on and
the power indicator lights up in green. In standby mode,
the player also turns on by pressing A on the player or by
pressing H.
and the power indicator lights up in red.
Then press @/1 on the remote. The player turns on and
the power indicator lights up in green. In standby mode,
the player also turns on by pressing A on the player or by
pressing H.
To tur n of f the player
Press @/1 on the remote. The player enters standby mode
and the power indicator lights up in red.
To disconnect the power of the player, press ! on the
player.
and the power indicator lights up in red.
To disconnect the power of the player, press ! on the
player.
Notes on playing DTS sound tracks on a CD
• Do not play DTS sound tracks without first connecting the
• Do not play DTS sound tracks without first connecting the
player to an audio component having a built-in DTS decoder.
The player outputs the DTS signal via the DIGITAL OUT
OPTICAL and COAXIAL connectors even if “DTS” in “AUDIO
SETUP” is set to “OFF” in the setup display, and may affect
your ears or cause your speakers to be damaged.
The player outputs the DTS signal via the DIGITAL OUT
OPTICAL and COAXIAL connectors even if “DTS” in “AUDIO
SETUP” is set to “OFF” in the setup display, and may affect
your ears or cause your speakers to be damaged.
• Set the sound to “STEREO” when you play DTS sound tracks
on a CD. (See “Changing the Sound” on page 31.) If you set
the sound to “1/L” or “2/R,” no sound will come from the
DIGITAL OUT OPTICAL and COAXIAL connectors.
the sound to “1/L” or “2/R,” no sound will come from the
DIGITAL OUT OPTICAL and COAXIAL connectors.
• If you play a CD with a DTS sound track, a loud noise may
come out from the AUDIO OUT connectors, affecting your ears
or causing the speakers to be damaged.
or causing the speakers to be damaged.
Notes on playing DTS sound tracks on a D V D
The signals of the DTS sound tracks are output from the
DIGITAL OUT OPTICAL and COAXIAL connectors only. No
sound will be output from the AUDIO OUT connectors.
• If the player is connected to an audio component lacking a
The signals of the DTS sound tracks are output from the
DIGITAL OUT OPTICAL and COAXIAL connectors only. No
sound will be output from the AUDIO OUT connectors.
• If the player is connected to an audio component lacking a
built-in DTS decoder, do not set “DTS” in “AUDIO SETUP” to
“ON” in the setup display. Otherwise, when you play the DTS
sound track, a loud noise will come out from the speakers,
affecting your ears or causing the speakers to be damaged.
“ON” in the setup display. Otherwise, when you play the DTS
sound track, a loud noise will come out from the speakers,
affecting your ears or causing the speakers to be damaged.
• When you set “DTS” in “AUDIO SETUP” to “OFF,” no sound
will come out from the DIGITAL OUT OPTICAL and
COAXIAL connectors even if you play DTS sound tracks on
DVDs.
COAXIAL connectors even if you play DTS sound tracks on
DVDs.
Notes
• If you leave the player or the remote in pause or stop mode for
• If you leave the player or the remote in pause or stop mode for
15 minutes, the screen saver image appears automatically. It
will also appear if you play back a CD for more than 15
minutes. To make the screen saver image go away, press H.
(If you want to set the screen saver function to off, see page 60.)
will also appear if you play back a CD for more than 15
minutes. To make the screen saver image go away, press H.
(If you want to set the screen saver function to off, see page 60.)
• If you don‘t operate the player or the remote for more than 30
minutes when a disc is not being played, the player
automatically enters standby mode. (Auto Power Off function)
automatically enters standby mode. (Auto Power Off function)
• While playing a disc, do not turn off the player by pressing !.
Doing so may cancel the settings of the menu. When you turn
off the player, press x first to stop playback and then press @/1
on the remote. After the power indicator lights up in red and
the player enters standby mode, press ! on the player.
off the player, press x first to stop playback and then press @/1
on the remote. After the power indicator lights up in red and
the player enters standby mode, press ! on the player.
A
x
X
H
.
/
>
Z
x
X
H
.
/
>
1
4
7
2
5
8
0
3
6
9
Playing Discs
19
You can locate a particular point on a disc quickly by
monitoring the picture or playing back slowly.
monitoring the picture or playing back slowly.
Note
Depending on the DVD/VIDEO CD, you may not be able to do
some of the operations described.
Depending on the DVD/VIDEO CD, you may not be able to do
some of the operations described.
Locating a point quickly by playing a disc
in fast for ward or fast reverse (Scan)
in fast for ward or fast reverse (Scan)
While a disc is playing, press
to locate a point in
playback direction, or press
to locate a point in
opposite direction. When you find the point you want,
press H to return to normal speed playback.
Each time you press the
press H to return to normal speed playback.
Each time you press the
or
button during scan,
the playback speed changes. Three speeds are available.
With each press, the display changes as follows:
With each press, the display changes as follows:
Playback direction
x2B (DVD/CD only) t FF1M t FF2M
Opposite direction
x2b (DVD only) t FR1m t FR2m
The x2B/x2b playback speed is about twice the normal speed.
The FF2M/FR2m playback speed is faster than FF1M/
FR1m.
The FF2M/FR2m playback speed is faster than FF1M/
FR1m.
Searching for a Particular Point on a Disc
Z
Locating a point slowly by watching the
screen (Slow-motion play)
screen (Slow-motion play)
You can use this function only for DVDs or VIDEO CDs.
When the player is in the pause mode, press
When the player is in the pause mode, press
to
locate a point in playback direction, or press
to
locate a point in opposite direction. When you find the
point you want, press H to return to the normal speed
playback.
Each time you press the
point you want, press H to return to the normal speed
playback.
Each time you press the
or
button during
Slow-motion play, the playback speed changes. Two
speeds are available. With each press, the indication
changes as follows:
speeds are available. With each press, the indication
changes as follows:
Playback direction
SLOW1
y SLOW2
Opposite direction (DVD only)
SLOW1
y SLOW2
The SLOW2
/SLOW2
playback speed is slower than
SLOW1
.
/
R
R
1
4
7
2
5
8
0
3
6
9
/SLOW1
Click on the first or last page to see other DVP-K350 service manuals if exist.