Read Sony DVP-K350 Service Manual online
1-3
12
COMPONENT VIDEO OUT
Y
1
2
1
2
C
B
/B-Y C
R
/R-Y
VIDEO OUT
S VIDEO OUT
DIGITAL OUT
COAXIAL OPTICAL
AUDIO OUT
WOOFER
1
R
L
PCM/DTS/MPEG/
DOLBY DIGITAL
2
CD
INPUT
L
R
L
S VIDEO
AUDIO
VIDEO
R
INPUT
2+1 Channel Surround Hookups
Required cords
Audio connecting cor d (not supplied) (1)
S video cor d (not supplied) (1)
Monaur al audio cor d (not supplied) (1)
One for a subwoofer
One for a subwoofer
When connecting the cords, be sure to match the color-coded
cord to the appropriate jacks on the components: Red (right) to
Red and White (left) to White. Be sure to make connections firmly
to avoid hum and noise.
cord to the appropriate jacks on the components: Red (right) to
Red and White (left) to White. Be sure to make connections firmly
to avoid hum and noise.
White (L)
Red (R)
White (L)
Red (R)
This connection is for listening to the sound through the
left and right speakers of the TV, or speakers connected to
a receiver and the subwoofer. You can enjoy rich bass
frequencies by connecting a subwoofer. Refer to the
instructions supplied with the component to be
connected.
Set “SUBWOOFER” in “SPEAKER SETUP” to “YES” in
the setup display (page 67). Then set “FRONT SPEAKER
SIZE” to “TV” when you use the TV’s speakers, or to
“LARGE,” “MIDDLE” or “SMALL” when you use the
speakers connected to the receiver.
left and right speakers of the TV, or speakers connected to
a receiver and the subwoofer. You can enjoy rich bass
frequencies by connecting a subwoofer. Refer to the
instructions supplied with the component to be
connected.
Set “SUBWOOFER” in “SPEAKER SETUP” to “YES” in
the setup display (page 67). Then set “FRONT SPEAKER
SIZE” to “TV” when you use the TV’s speakers, or to
“LARGE,” “MIDDLE” or “SMALL” when you use the
speakers connected to the receiver.
z
You can enjoy surround sounds even if you connect front
speakers only
You can use 3D sound imaging to create virtual rear speakers
from the sound of the front speakers (L, R) without using actual
rear speakers (Virtual Enhanced Surround). For details, see page
35.
You can use 3D sound imaging to create virtual rear speakers
from the sound of the front speakers (L, R) without using actual
rear speakers (Virtual Enhanced Surround). For details, see page
35.
To AUDIO
OUT
OUT
TV
Receiver (Amplifier)
To audio input
To S VIDEO
OUT
OUT
To S VIDEO input
To AUDIO
OUT
(WOOFER)
OUT
(WOOFER)
To audio input
or
To mains
Subwoofer
(Active type)
(Active type)
: Signal flow
CD/DVD player
Notes
You cannot enjoy a picture with an S video signal if your TV does
not conform to the S video signal. When your TV does not have
an S VIDEO input, connect the component via the VIDEO INPUT
connector using the video connecting cord (not supplied) instead
of the S video cord. For details, see page 8.
Refer to the instructions supplied with your TV.
You cannot enjoy a picture with an S video signal if your TV does
not conform to the S video signal. When your TV does not have
an S VIDEO input, connect the component via the VIDEO INPUT
connector using the video connecting cord (not supplied) instead
of the S video cord. For details, see page 8.
Refer to the instructions supplied with your TV.
13
5.1 Channel Surround Hookups
With DVDs which contain DTS, Dolby Digital or MPEG
audio sound, you can enjoy the surround sound while
producing the effect of being in a movie theater or a
concert hall using a digital component with a built-in
DTS, Dolby Digital or MPEG decoder (not supplied). The
player outputs the surround sound signals from the
DIGITAL OUT OPTICAL and COAXIAL connectors.
Using a receiver (amplifier) having the OPTICAL or
COAXIAL connector and 6 speakers, you can enjoy even
greater real audio presence in the comfort of your own
home.
audio sound, you can enjoy the surround sound while
producing the effect of being in a movie theater or a
concert hall using a digital component with a built-in
DTS, Dolby Digital or MPEG decoder (not supplied). The
player outputs the surround sound signals from the
DIGITAL OUT OPTICAL and COAXIAL connectors.
Using a receiver (amplifier) having the OPTICAL or
COAXIAL connector and 6 speakers, you can enjoy even
greater real audio presence in the comfort of your own
home.
Notes
• When a DVD has a sound track with 7.1 channels recorded in
• When a DVD has a sound track with 7.1 channels recorded in
MPEG audio format, the output audio signals are mixed down
to 5.1 channels.
to 5.1 channels.
• You cannot use the karaoke function with the DIGITAL OUT
connectors.
Required cords
Optical digital connecting cor d* (not supplied) (1)
Coaxial digital connecting cord* (not supplied) (1)
S video cor d (not supplied) (1)
* Connect the component via the DIGITAL OUT OPTICAL or
COAXIAL connector using an optical or coaxial digital
connecting cord (not supplied). You do not need to connect
both of these cords. See the figure on the next page.
connecting cord (not supplied). You do not need to connect
both of these cords. See the figure on the next page.
Notes
• Do not connect the mains lead to mains or press the POWER
• Do not connect the mains lead to mains or press the POWER
switch before completing all connections.
• Refer to the instructions supplied with the component to be
connected.
• The cord connectors should be fully inserted into the jacks. A
loose connection may cause hum and noise.
Setups for the player
Some setup adjustments are necessary for the player
depending on the components to be connected.
Use the setup display to change the various settings.
For details on using the setup display, see page 56.
depending on the components to be connected.
Use the setup display to change the various settings.
For details on using the setup display, see page 56.
•
When you connect an audio component with a built-
in Dolby Digital decoder
in Dolby Digital decoder
A
Set “DIGITAL OUT” in “AUDIO SETUP” to “ON” and
then set “DOLBY DIGITAL” to “DOLBY DIGITAL” in
the setup display. (page 65)
then set “DOLBY DIGITAL” to “DOLBY DIGITAL” in
the setup display. (page 65)
•
When you connect an audio component with a built-
in MPEG decoder
in MPEG decoder
B
Set “DIGITAL OUT” in “AUDIO SETUP” to “ON” and
then set “MPEG” to “MPEG” in the setup display. (page
65)
then set “MPEG” to “MPEG” in the setup display. (page
65)
•
When you connect an audio component with a built-
in DTS decoder
in DTS decoder
C
Set “DIGITAL OUT” in “AUDIO SETUP” to “ON” and
then set “DTS” to “ON” in the setup display. (page 65)
then set “DTS” to “ON” in the setup display. (page 65)
Notes
•
•
When you do not connect an audio component with a
built-in Dolby Digital decoder, do not set “DOLBY DIGITAL”
to “DOLBY DIGITAL.”
built-in Dolby Digital decoder, do not set “DOLBY DIGITAL”
to “DOLBY DIGITAL.”
•
When you do not connect an audio component with a
built-in MPEG decoder, do not set “MPEG” to “MPEG.”
built-in MPEG decoder, do not set “MPEG” to “MPEG.”
•
When you do not connect an audio component with a
built-in DTS decoder, do not set “DTS” to “ON.”
built-in DTS decoder, do not set “DTS” to “ON.”
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DOWNMIX:
DIGITAL OUT:
AUDIO DRC:
DOWNMIX:
DIGITAL OUT:
To set, press , then .
To quit, press .
To quit, press .
OFF
STANDARD
DOLBY SURROUND
ON
ENTER
DOLBY DIGITAL:
MPEG:
MPEG:
DOLBY DIGITAL
MPEG
DTS:
ON
DISPLAY
14
COMPONENT VIDEO OUT
Y
1
2
1
2
C
B
/B-Y C
R
/R-Y
VIDEO OUT
S VIDEO OUT
DIGITAL OUT
COAXIAL OPTICAL
AUDIO OUT
WOOFER
1
R
L
PCM/DTS/MPEG/
DOLBY DIGITAL
2
S VIDEO IN
+
–
R
L
R
L
R
L
CENTER
S-VIDEO
IN
VIDEO
S-VIDEO
OUT
VIDEO
S-VIDEO
OUT
VIDEO
S-VIDEO
IN
VIDEO
S-VIDEO
OUT
VIDEO
S-VIDEO
IN
VIDEO
IN
L
R
REC OUT
AUDIO
IN
L
R
L
R
AUDIO
OUT
AUDIO
IN
AUDIO
OUT
AUDIO
IN
FRONT
REAR
WOOFER
CENTER
TAPE
VIDEO 2
DVD
VIDEO 1
MONITOR
PRE OUT
IN
CD
IN
REC OUT
MD/DAT
IN
TUNER
IN
PHONO
DVD IN
OPT
DVD IN
COAX
TV/LD IN
AC-3 RF
AC-3 RF
SIGNAL
GND
GND
DIGITAL
TV/LD IN OPT
CD IN OPT
MD/DAT OUT OPT
MD/DAT IN OPT
CTRL A1
AC OUTLET
L
R
WOOFER
FRONT
B
REAR
A
FRONT
REAR
5.1 INPUT
CENTER
TV/LD
S-VIDEO
IN
VIDEO
AUDIO
IN
S-LINK
SPEAKERS
INPUT
Front speaker
(L)
(L)
Front speaker
(R)
(R)
Rear speaker (R)
Rear speaker (L)
Center speaker
Subwoofer
(Active type)
AV Receiver
(Amplifier) with a
built-in DTS
decoder, Dolby
Digital decoder or
MPEG decoder
(Amplifier) with a
built-in DTS
decoder, Dolby
Digital decoder or
MPEG decoder
TV
CD/DVD player
: Signal flow
To mains
To S VIDEO
OUT
OUT
To S VIDEO
input
input
To DIGITAL
OUT
(OPTICAL)
Take off the
cap.
OUT
(OPTICAL)
Take off the
cap.
To
DIGITAL
OUT
(COAXIAL)
DIGITAL
OUT
(COAXIAL)
To optical
digital
input
digital
input
To coaxial
digital input
digital input
5.1 Channel Surround Hookups
15
You can select the language for the setup display, the
Control Menu display or the messages displayed on the
screen. The default setting is “ENGLISH.”
Control Menu display or the messages displayed on the
screen. The default setting is “ENGLISH.”
1
When the player is in stop mode, press DISPLAY
and select “SETUP” using
and select “SETUP” using
M
/
m
.
The on-screen menu items are different depending on
whether there is a disc in the player or not.
whether there is a disc in the player or not.
2
Press ENTER.
The setup display appears on the TV screen.
Selecting the Language for the On-Screen Display
DISPLAY
<
/
M
/
m
/
,
3
Select “LANGUAGE SETUP” using
M
/
m
, and then
press ENTER.
4
Select “OSD” using
M
/
m
, then press
,
or ENTER.
The languages you can select are displayed.
5
Select the desired language using
M
/
m
, then press
ENTER.
6
Press DISPLAY.
The setup display disappears.
7
Press DISPLAY repeatedly to turn off the on-screen
menu.
menu.
To return to the pr evious screen
Press ORETURN.
To quit while making a selection
Press DISPLAY.
Note
The languages you can select are the ones displayed in step 4.
The languages you can select are the ones displayed in step 4.
LANGUAGE SETUP
OSD:
DVD MENU:
AUDIO:
SUBTITLE:
DVD MENU:
AUDIO:
SUBTITLE:
To set, press , then .
ENGLISH
ENGLISH
ENGLISH
ORIGINAL
AUDIO FOLLOW
ENTER
To quit, press .
DISPLAY
DVD
Select:
SETUP
ENTER
STOP
LANGUAGE SETUP
OSD:
DVD MENU:
AUDIO:
SUBTITLE:
DVD MENU:
AUDIO:
SUBTITLE:
To set, press , then .
To quit, press .
To quit, press .
ENGLISH
ENGLISH
ENGLISH
ORIGINAL
AUDIO FOLLOW
ENTER
DISPLAY
LANGUAGE SETUP
OSD:
DVD MENU:
AUDIO:
SUBTITLE:
DVD MENU:
AUDIO:
SUBTITLE:
ENGLISH
CHINESE 1
CHINESE 2
CHINESE 2
ENGLISH
To set, press , then .
ENTER
To quit, press .
DISPLAY
Selected
item
item
1
4
7
2
5
8
0
3
6
9
ENTER
details, see page 59.
For
Click on the first or last page to see other DVP-K350 service manuals if exist.