Read Sony DVP-F35P Service Manual online
1-5
22
Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
an MD deck or DAT deck
If the stereo amplifier (receiver) has audio input jacks L and R only, use
. If the amplifier
(receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use
.
In this case, you can also connect the player directly to the MD deck or DAT deck without using
your stereo amplifier (receiver).
your stereo amplifier (receiver).
B
B-1
B-2
PROGRESSIVE
NORMAL
VIDEO OUT
COMPONENT
VIDEO OUT
DIGITAL OUT
P
R
/C
R
P
B
/C
B
PCM/DTS/MPEG/
DOLBY DIGITAL
DOLBY DIGITAL
Y
S VIDEO OUT
R-AUDIO-L
OPTICAL
COAXIAL
B-1
B-2
R-AUDIO-L
DIGITAL OUT
PCM/DTS/MPEG/
DOLBY DIGITAL
DOLBY DIGITAL
OPTICAL
COAXIAL
CD/DVD player
or
Stereo amplifier (receiver)
MD deck/DAT deck
Front (L)
Front (R)
[Speakers]
(white)
(red)
(red)
(white)
Optical digital cord
(not supplied)
Remove jack cap
before connecting
(not supplied)
Remove jack cap
before connecting
Stereo audio cord
(not supplied)
(not supplied)
to audio input
to coaxial or optical digital input
Coaxial digital cord
(not supplied)
(not supplied)
or
l
: Signal flow
to AUDIO L/R
to DIGITAL OUT
(COAXIAL or OPTICAL)
(COAXIAL or OPTICAL)
23
H
ook
up
s
s
Connecting to an AV amplifier (receiver) having a Dolby Surround (Pro
Logic) decoder and 3 to 6 speakers
You can enjoy Dolby Surround effects only when playing Dolby Surround audio or multi-
channel audio (Dolby Digital) discs.
If your amplifier (receiver) has L and R audio input jacks only, use
channel audio (Dolby Digital) discs.
If your amplifier (receiver) has L and R audio input jacks only, use
. If your amplifier
(receiver) has a digital input jack, use
.
Note
When connecting 6 speakers, replace the monaural
rear speaker with a centre speaker, 2 rear speakers
and a subwoofer.
rear speaker with a centre speaker, 2 rear speakers
and a subwoofer.
C
C-1
C-2
PROGRESSIVE
NORMAL
VIDEO OUT
COMPONENT
VIDEO OUT
DIGITAL OUT
P
R
/C
R
P
B
/C
B
PCM/DTS/MPEG/
DOLBY DIGITAL
DOLBY DIGITAL
Y
S VIDEO OUT
R-AUDIO-L
OPTICAL
COAXIAL
C-1
C-2
R-AUDIO-L
DIGITAL OUT
PCM/DTS/MPEG/
DOLBY DIGITAL
DOLBY DIGITAL
OPTICAL
COAXIAL
CD/DVD player
or
Front (R)
Front (L)
Rear (R)
Subwoofer
Rear (L)
Amplifier (receiver) with Dolby
Surround decoder
Surround decoder
Centre
Rear (mono)
Stereo audio cord
(not supplied)
(not supplied)
[Speakers]
Optical digital cord
(not supplied)
Remove jack cap
before connecting
(not supplied)
Remove jack cap
before connecting
(red)
(white)
to coaxial or optical digital input
Coaxial digital cord
(not supplied)
(not supplied)
[Speakers]
or
to audio input
(white)
(red)
to AUDIO L/R
to DIGITAL OUT
(COAXIAL or OPTICAL)
(COAXIAL or OPTICAL)
l
: Signal flow
,
continued
24
Connecting to an AV amplifier (receiver) with a digital input jack, and a
decoder (Dolby Digital, MPEG audio or DTS), and 6 speakers
This connection will allow you to use the Dolby Digital, MPEG audio or DTS decoder function
of your AV amplifier (receiver).
of your AV amplifier (receiver).
z Hint
Use connection
Use connection
when connecting to 7 or
more speakers (6.1 ch or more).
Notes
• After you have completed the connection, be sure
to set “DOLBY DIGITAL” to “DOLBY
DIGITAL” and “DTS” to “ON” in Quick Setup
(page 25). If your AV amplifier (receiver) has an
MPEG audio decoder function, set “MPEG” to
DIGITAL” and “DTS” to “ON” in Quick Setup
(page 25). If your AV amplifier (receiver) has an
MPEG audio decoder function, set “MPEG” to
“MPEG” (page 72). Otherwise, no sound or a
loud noise will come from the speakers.
loud noise will come from the speakers.
• In order to listen to DTS sound tracks, you must
use this connection. DTS sound tracks are not
output through the AUDIO L/R jacks, even if you
set “DTS” to “ON” in Quick Setup (page 25).
output through the AUDIO L/R jacks, even if you
set “DTS” to “ON” in Quick Setup (page 25).
• When you connect an amplifier (receiver) that
conforms to the 96 kHz sampling frequency, set
“48kHz/96kHz PCM” in “AUDIO SETUP” to
“96kHz/24bit” (page 72).
“48kHz/96kHz PCM” in “AUDIO SETUP” to
“96kHz/24bit” (page 72).
D
PROGRESSIVE
NORMAL
VIDEO OUT
COMPONENT
VIDEO OUT
DIGITAL OUT
P
R
/C
R
P
B
/C
B
PCM/DTS/MPEG/
DOLBY DIGITAL
DOLBY DIGITAL
Y
S VIDEO OUT
R-AUDIO-L
OPTICAL
COAXIAL
D
DIGITAL OUT
PCM/DTS/MPEG/
DOLBY DIGITAL
DOLBY DIGITAL
OPTICAL
COAXIAL
Front (R)
Front (L)
Rear (R)
AV amplifier (receiver) having
a decoder
a decoder
Subwoofer
Centre
Optical digital cord
(not supplied)
Remove jack cap
before connecting
(not supplied)
Remove jack cap
before connecting
Coaxial digital cord
(not supplied)
(not supplied)
[Speakers]
CD/DVD player
l
: Signal flow
[Speakers]
Rear (L)
to optical digital input
or
to coaxial digital input
to DIGITAL OUT
(COAXIAL or OPTICAL)
(COAXIAL or OPTICAL)
D
25
H
ook
up
s
s
Step 5: Connecting the Mains Lead
Plug the player and TV mains lead (power cord) into a mains.
Step 6: Quick Setup
Follow the steps below to make the minimum number of basic adjustments for using the player.
To skip an adjustment, press >. To return to the previous adjustment, press ..
The on-screen displays differ depending on the player model. European models are used for
illustration unless otherwise specified.
To skip an adjustment, press >. To return to the previous adjustment, press ..
The on-screen displays differ depending on the player model. European models are used for
illustration unless otherwise specified.
1
Turn on the TV.
2
Press
[/1.
3
Switch the input selector on your
TV so that the signal from the
player appears on the TV screen.
“Press [ENTER] to run QUICK SETUP”
appears at the bottom of the screen. If this
message does not appear, select
“QUICK” under “SETUP” in the Control
Menu to run Quick Setup (page 67).
appears at the bottom of the screen. If this
message does not appear, select
“QUICK” under “SETUP” in the Control
Menu to run Quick Setup (page 67).
4
Press ENTER without inserting a
disc.
The Setup Display for selecting the
language used in the on-screen display
appears.
The available languages differ depending
upon the player model.
language used in the on-screen display
appears.
The available languages differ depending
upon the player model.
5
Press X/x to select a language.
The player displays the menu and
subtitles in the selected language.
subtitles in the selected language.
[
/
1
.
/
>
ENTER
X
/
x
LANGUAGE SETUP
OSD:
MENU:
AUDIO:
SUBTITLE:
MENU:
AUDIO:
SUBTITLE:
ITALIANO
ESPAÑOL
NEDERLANDS
DANSK
SVENSKA
FRANÇAIS
ENGLISH
ENGLISH
DEUTSCH
,
continued
Click on the first or last page to see other DVP-F35P service manuals if exist.