Read Sony DVP-F250 Service Manual online
1-6
24
Step 5: Attaching the Stand
You can use the player laid flat, or in an upright position. Be sure to attach the supplied stand
when using in the upright position. If the player is to be used in the flat position, go to “Step 6
Connecting the Mains Lead” (page 25).
when using in the upright position. If the player is to be used in the flat position, go to “Step 6
Connecting the Mains Lead” (page 25).
1
Attach the stand to the screw hole on the player using the supplied screw.
2
Place the player on the stand.
z Hint
You can switch the front panel display by pressing
DISPLAY POSITION on the player. The contents
will appear vertically or horizontally (page 9).
You can switch the front panel display by pressing
DISPLAY POSITION on the player. The contents
will appear vertically or horizontally (page 9).
Notes
• Use the supplied stand only when you use the
player in an upright position. Do not attach the
stand when you use the player laid flat.
stand when you use the player laid flat.
• To move the player, hold the player itself. If you
hold the stand, it may break.
• Do not use the player in an upright position
without attaching the stand. The player will be
unstable and may fall over.
unstable and may fall over.
• Keep the screws out of reach of children as they
may swallow them.
25
H
ook
up
s
s
Step 6: Connecting the Mains Lead
When you have finished connecting all of the components, plug the player and TV mains lead
(power cord) into the mains.
(power cord) into the mains.
Step 7: Quick Setup
Follow the steps below to make the minimum number of basic adjustments for using the player.
To skip an adjustment, press
To skip an adjustment, press
>. To return to the previous adjustment, press ..
The on-screen displays differ depending on the player model. European models are used for
illustration unless otherwise specified.
illustration unless otherwise specified.
1
Turn on the TV.
2
Press
[/1.
3
Switch the input selector on your
TV so that the signal from the
player appears on the TV screen.
player appears on the TV screen.
“Press [ENTER] to run QUICK SETUP”
appears at the bottom of the screen. If this
message does not appear, select
“QUICK” under “SETUP” in the Control
Menu to run Quick Setup (page 63).
appears at the bottom of the screen. If this
message does not appear, select
“QUICK” under “SETUP” in the Control
Menu to run Quick Setup (page 63).
4
Press ENTER without inserting a
disc.
The Setup Display for selecting the
language used in the on-screen display
appears.
The available languages differ depending
upon the player model.
language used in the on-screen display
appears.
The available languages differ depending
upon the player model.
5
Press
X/x to select a language.
The player uses the language selected
here to display the menu and subtitles as
well.
here to display the menu and subtitles as
well.
ENTER
LANGUAGE SETUP
OSD
MENU
AUDIO
SUBTITLE
MENU
AUDIO
SUBTITLE
ITALIANO
ESPAÑOL
NEDERLANDS
DANSK
SVENSKA
FRANÇAIS
ENGLISH
ENGLISH
DEUTSCH
,
continued
26
6
Press ENTER.
The Setup Display for selecting the
aspect ratio of the TV to be connected
appears.
Example Asian/Oceanian models
aspect ratio of the TV to be connected
appears.
Example Asian/Oceanian models
7
Press
X/x to select the setting that
matches your TV type.
◆ If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
• 16 9 (page 64)
standard TV with a wide-screen mode
• 16 9 (page 64)
◆ If you have a 4:3 standard TV
• 4 3 LETTER BOX or 4 3 PAN SCAN
• 4 3 LETTER BOX or 4 3 PAN SCAN
(page 64)
8
Press ENTER.
The Setup Display for selecting the type
of jack used to connect your amplifier
(receiver) appears.
of jack used to connect your amplifier
(receiver) appears.
9
Press
X/x to select the type of jack
(if any) you are using to connect to
an amplifier (receiver), then press
ENTER.
ENTER.
Choose the item that matches the audio
connection you selected on pages 20 to
23 (
connection you selected on pages 20 to
23 (
through
).
• If you connect just a TV and nothing
else, select “NO.” Quick Setup is
finished and connections are complete.
finished and connections are complete.
• Select “LINE OUTPUT L/R
(AUDIO).” Quick Setup is finished and
connections are complete.
connections are complete.
• Select “DIGITAL OUTPUT.” The
Setup Display for “DOLBY DIGITAL”
appears.
appears.
10
Press
X/x to select the type of
Dolby Digital signal you wish to
send to your amplifier (receiver).
Choose the signal that matches the audio
connection you selected on pages 21 to
23 (
connection you selected on pages 21 to
23 (
through
).
• D-PCM (page 67)
• DOLBY DIGITAL (only if the
amplifier (receiver) has a Dolby Digital
decoder) (page 67)
decoder) (page 67)
11
Press ENTER.
“DTS” is selected.
SCREEN SETUP
TV TYPE
SCREEN SAVER
BACKGROUND
BACKGROUND
16 9
4 3 PAN SCAN
COLOR SYSTEM
4 3 LETTER BOX
16 9
YES
NO
Is this player connected to an amp ifier
(receiver) ? Select the type of jack you
are using
(receiver) ? Select the type of jack you
are using
NE OUTPUT L/R (AUDIO)
DIG TAL OUTPUT
A
D
A
B-1
C-1
B-2
C-2
D
B
D
AUDIO SETUP
AUDIO ATT
AUDIO DRC
AUDIO DRC
DIGITAL OUT
DOLBY DIGITAL
MPEG
MPEG
OFF
STANDARD
ON
DOWNMIX
DOLBY SURROUND
D PCM
DTS
DOLBY DIGITAL
D PCM
B-2
C-2
D
AUDIO SETUP
AUDIO ATT
AUDIO DRC
AUDIO DRC
DIGITAL OUT
DOLBY DIGITAL
MPEG
MPEG
OFF
STANDARD
ON
DOWNMIX
DOLBY SURROUND
D PCM
PCM
DTS
OFF
OFF
OFF
ON
27
H
ook
up
s
s
12
Press
X/x to select whether or
not you wish to send a DTS signal
to your amplifier (receiver).
to your amplifier (receiver).
Choose the item that matches the audio
connection you selected on pages 21 to
23 (
connection you selected on pages 21 to
23 (
through
).
• OFF (page 67)
• ON (only if the amplifier (receiver) has
a DTS decoder) (page 67)
13
Press ENTER.
Quick Setup is finished. All connections
and setup operations are complete.
If your AV amplifier (receiver) has an
MPEG audio decoder, set “MPEG” to
“MPEG” (page 67).
and setup operations are complete.
If your AV amplifier (receiver) has an
MPEG audio decoder, set “MPEG” to
“MPEG” (page 67).
Enjoying the surround sound
effects
effects
To enjoy the surround sound effects of this
player or your amplifier (receiver), set the
following items as described below for the
audio connection you selected on pages 21 to
23 (
player or your amplifier (receiver), set the
following items as described below for the
audio connection you selected on pages 21 to
23 (
through
). Each of these is the
default setting and does not need to be
adjusted when you first connect the player.
See page 62 for using the Setup Display.
adjusted when you first connect the player.
See page 62 for using the Setup Display.
Audio Connection (pages 20 to 23)
• No additional settings are needed.
• Set “DOWNMIX” to “DOLBY
SURROUND” (page 67)
• If the sound distorts even when the volume
is turned down, set “AUDIO ATT” to “ON”
(page 66)
(page 66)
• Set “DOWNMIX” to “DOLBY
SURROUND” (page 67)
• Set “DIGITAL OUT” to “ON” (page 67)
B
D
B-2
C-2
D
B
D
A
B-1
C-1
B-2
C-2
D
Click on the first or last page to see other DVP-F250 service manuals if exist.