Read Sony DVP-F250 Service Manual online
1-5
20
Connecting to your TV
This connection will use your TV speakers for sound.
* The yellow plug is used for video signals (page
16).
z Hint
When connecting to a monaural TV, use a stereo-
mono conversion cord (not supplied). Connect the
LINE OUT L/R (AUDIO) jacks to the TV’s audio
input jack.
When connecting to a monaural TV, use a stereo-
mono conversion cord (not supplied). Connect the
LINE OUT L/R (AUDIO) jacks to the TV’s audio
input jack.
A
DIG TAL OUT
OPT CAL COAX AL
PCM DTS MPEG/
DO BY D GI AL
COMPONENT V DEO OUT
L NE OUT
S V DEO
OUT
Y
R
A DIO
V DE
L
B
C
R
A
LINE OUT
AUD O
VIDEO
L
TV
l
: Signal flow
CD/DVD player
Audio/video
cord (supplied)
cord (supplied)
to audio input
(yellow)
*
(white)
(yellow)
*
to LINE OUT
L/R (AUDIO)
L/R (AUDIO)
(red)
(wh te)
(red)
For European models:
Use the EURO AV adapter (supplied)
to connect to the SCART (EURO AV)
input jack on the TV.
Use the EURO AV adapter (supplied)
to connect to the SCART (EURO AV)
input jack on the TV.
21
H
ook
up
s
s
Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
an MD deck or DAT deck
If the stereo amplifier (receiver) has audio input jacks L and R only, use
. If the amplifier
(receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use
.
In this case, you can also connect the player directly to the MD deck or DAT deck without using
your stereo amplifier (receiver).
your stereo amplifier (receiver).
z Hint
In connection
In connection
, you can use the supplied
audio/video cord instead of using a separate audio
cord.
cord.
B
B-1
B-2
DIGI AL OUT
OPT CAL COAX AL
PCM/ TS MPEG/
DO BY DI I AL
COMPONENT V DEO OUT
L NE OUT
S V DEO
OUT
Y
R
A DIO
V DE
L
C
B
C
R
B-1
B-2
DIGITAL OUT
OPTICAL COAXIAL
PCM DTS/MPEG/
DOLBY D GITAL
LINE OUT
R
AUD O
VIDEO
L
CD/DVD player
or
Stereo amplifier (receiver)
MD deck/DAT deck
Front (L)
Front (R)
[Speakers]
(white)
(red)
(red)
(white)
Coaxial digital
cord (not supplied)
cord (not supplied)
Stereo audio cord
(not supplied)
(not supplied)
to audio input
to coaxial or optical
digital input
digital input
Optical digital cord
(not supplied)
(not supplied)
or
l
: Signal flow
to LINE OUT L/R (AUDIO)
to DIGITAL OUT
(COAXIAL or OPTICAL)
(COAXIAL or OPTICAL)
B-1
,
continued
22
Connecting to an AV amplifier (receiver) having a Dolby Surround (Pro
Logic) decoder and 3 to 6 speakers
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multi-
channel audio (Dolby Digital) discs.
If your amplifier (receiver) has L and R audio input jacks only, use
channel audio (Dolby Digital) discs.
If your amplifier (receiver) has L and R audio input jacks only, use
. If your amplifier
(receiver) has a digital input jack, use
.
z Hint
In connection
In connection
, you can use the supplied
audio/video cord instead of using a separate audio
cord.
cord.
Note
When connecting 6 speakers, replace the monaural
rear speaker with a centre speaker, 2 rear speakers
and a subwoofer.
rear speaker with a centre speaker, 2 rear speakers
and a subwoofer.
C
C-1
C-2
D G TAL OUT
OPT CAL CO XIAL
PCM DTS MPEG/
DOLBY D GI AL
COMPONENT VIDEO OUT
LINE OUT
S V DEO
OUT
Y
R
UD O
VID O
L
C
B
C
R
C-1
C-2
DIGITAL OUT
OPTICAL COAX AL
PCM/DTS/MPEG/
DOLBY DIGITAL
LINE OUT
R
AUDIO
V DEO
L
CD/DVD player
or
Front (R)
Front (L)
Rear (R)
Subwoofer
l
: Signal flow
Rear (L)
Amplifier (receiver) with Dolby
Surround decoder
Surround decoder
Centre
Rear (mono)
Stereo
audio cord (not
supplied)
audio cord (not
supplied)
[Speakers]
Coaxial digital cord
(not supplied)
(not supplied)
(red)
(white)
to coaxial or optical
digital input
digital input
Optical digital cord
(not supplied)
(not supplied)
[Speakers]
or
to audio input
(white)
(red)
to LINE OUT L/R (AUDIO)
to DIGITAL OUT
(COAXIAL or OPTICAL)
(COAXIAL or OPTICAL)
C-1
23
H
ook
up
s
s
Connecting to an AV amplifier (receiver) with a digital input jack having
a Dolby Digital, MPEG audio or DTS decoder and 6 speakers
This connection will allow you to use the Dolby Digital, MPEG audio, or DTS decoder function
of your AV amplifier (receiver).
of your AV amplifier (receiver).
z Hint
Use connection
Use connection
when connecting to 7 or
more speakers (6.1 ch or more).
Note
After you have completed the connection, be sure to
set “DOLBY DIGITAL” to “DOLBY DIGITAL”
and “DTS” to “ON” in Quick Setup (page 25). If
your AV amplifier (receiver) has an MPEG audio
decoder function, set “MPEG” to “MPEG” (page
67). Otherwise, no sound or a loud noise will come
from the speakers.
set “DOLBY DIGITAL” to “DOLBY DIGITAL”
and “DTS” to “ON” in Quick Setup (page 25). If
your AV amplifier (receiver) has an MPEG audio
decoder function, set “MPEG” to “MPEG” (page
67). Otherwise, no sound or a loud noise will come
from the speakers.
D
DIG TAL OUT
OPT CAL COAX AL
PCM/ TS MPEG/
DO BY DI I AL
COMPONENT V DEO OUT
L NE OUT
S V DEO
OUT
Y
R
A DIO
V DE
L
C
B
C
R
D
DIGITAL OUT
OPTICAL COAXIAL
PCM/DTS MPEG/
DOLBY DIG TAL
Front (R)
Front (L)
Rear (R)
AV amplifier (receiver) having a decoder
Subwoofer
Centre
Coaxial digital cord
(not supplied)
(not supplied)
Optical digital cord (not
supp ied)
supp ied)
[Speakers]
CD/DVD player
l
: Signal flow
Rear (L)
to optical digital input
or
to coaxial digital input
to DIGITAL OUT
(COAXIAL or OPTICAL)
(COAXIAL or OPTICAL)
[Speakers]
D
Click on the first or last page to see other DVP-F250 service manuals if exist.