Read Sony DVP-F21 Service Manual online
1-15
62
To change the password
1
Follow Steps 1 through 6 of “Limiting
playback by children (Parental Control).”
playback by children (Parental Control).”
2
Select “CHANGE PASSWORD
t”
using
x, then press ENTER.
The display for entering the password
appears.
appears.
3
Follow Step 6 to enter a new password.
Playing the disc for which Parental
Control is set
Control is set
1
Insert the disc and press
H.
The Control Bar appears.
2
Enter your 4-digit password using
X/x
to select the digit, followed by
c to move
the cursor. Then press ENTER.
The player starts playback.
The player starts playback.
z
If you forget your password, remove the disc and
repeat Step 1 to 5 of “Limiting playback by children.”
When you are asked to enter your password, enter
“199703,” then press ENTER. (Press
When you are asked to enter your password, enter
“199703,” then press ENTER. (Press
c after the 4th
digit to allow the entire 6 digit number to be entered.)
The display will ask you to enter a new 4-digit
password. After you enter a new 4-digit password in
Step 6, insert the disc in the player and press
The display will ask you to enter a new 4-digit
password. After you enter a new 4-digit password in
Step 6, insert the disc in the player and press
H
.
When the Control Bar appears, enter your new
password.
password.
Note
When you play DVDs which do not have the Parental
Control function, playback cannot be limited on this
player.
Control function, playback cannot be limited on this
player.
Area Code
PASSWORD
Standard
Code
number
number
Argentina
2044
Australia
2047
Austria
2046
Belgium
2057
Brazil
2070
Canada
2079
Chile
2090
China
2092
Denmark
2115
Finland
2165
France
2174
Germany
2109
Hong Kong
2219
India
2248
Indonesia
2238
Italy
2254
Japan
2276
Standard
Code
number
number
Korea
2304
Malaysia
2363
Mexico
2362
Netherlands
2376
New Zealand 2390
Norway
2379
Pakistan
2427
Philippines
2424
Portugal
2436
Russia
2489
Singapore
2501
Spain
2149
Sweden
2499
Switzerland
2086
Taiwan
2543
Thailand
2528
United
Kingdom
Kingdom
2184
63
Us
ing V
ing V
a
ri
ous Additional
Fu
nc
tio
tio
n
s
Operation Sound Effects
(Sound Feedback)
The player beeps when the following
operations are performed.
The default setting of the Sound Feedback
function is set to off.
operations are performed.
The default setting of the Sound Feedback
function is set to off.
To set Sound Feedback
1
Press
?/1 on the player or the remote.
The
?/1 indicator lights up in green.
When there is a disc in the player, press
A and remove the disc.
A and remove the disc.
2
Press and hold
X on the player for more
than two seconds.
You will hear one beep and the Sound
Feedback function is turned on.
You will hear one beep and the Sound
Feedback function is turned on.
To turn off the Sound Feedback
function
When there is no disc in the player, press and
hold
hold
X on the player for more than two
seconds. You will hear two beeps and the
Sound Feedback function is turned off.
Sound Feedback function is turned off.
Operation
Operation sound
Power is turned on
One beep
Power is turned off
Two beeps
H
is pressed
One beep
X
is pressed
Two beeps
Playback is stopped
One long beep
Operation is not possible
Three beeps
?/1
button/indicator
X
?/1
A
64
Controlling Your TV, etc.
with the Supplied Remote
with the Supplied Remote
By adjusting the remote signal, you can
control your TV or Sony Active Speaker
System SA-F21 (not supplied) with the
supplied remote.
control your TV or Sony Active Speaker
System SA-F21 (not supplied) with the
supplied remote.
Notes
• Depending on the units being connected, you may
not be able to control your TV or Sony AV amplifier
(receiver) using some of the buttons below.
(receiver) using some of the buttons below.
• If you enter a new TV code, the code previously
entered will be erased.
• When you replace the batteries of the remote, the TV
code may be reset to the default setting. Reset the
appropriate code.
appropriate code.
Controlling TVs with the remote
1
Slide the TV/DVD switch to “TV.”
2
Hold down
?/1, and enter your TV’s
manufacturer’s code (see the table)
using
using
C/X/x/c.
3
Release
?/1.
Manufacturer’s codes of controllable
TVs
Controlling the TV
When you set the TV/DVD switch to “TV,”
you can control your TV using the buttons
below.
you can control your TV using the buttons
below.
TV/VIDEO
VOL
?/1
TV/DVD
WIDE MODE
C/X/x/c
By pressing
You can
?/1
Turn the TV on or off
VOL (volume) +/–
Adjust the volume of the
TV
TV
TV/VIDEO
Switch the TV’s input
source between the TV and
other input sources
source between the TV and
other input sources
WIDE MODE
Switch to or from the wide
mode of a Sony wide TV
mode of a Sony wide TV
Manufacturer Press
C/X/x/c to input code
Sony (default)
XX
Fisher
Xx
General Electric
XC
JVC
xX
Magnavox
Xc
Panasonic
cc
Philips
Xc
Quasar
cx
RCA
XC
Samsung
xc
Sanyo
Xx
Sears
cC or XC or Xx
Sharp
cx
Teknika
Xc
Toshiba
cC
Zenith
cX
65
Us
ing V
ing V
a
ri
ous Additional
Fu
nc
tio
tio
n
s
Controlling Active Speaker System
SA-F21
SA-F21
When you set the TV/DVD switch to
“DVD,” you can adjust the volume using
VOL +/–.
“DVD,” you can adjust the volume using
VOL +/–.
z
There are some Sony audio products you can
adjust the volume with the supplied remote.
Click on the first or last page to see other DVP-F21 service manuals if exist.