Read Sony DVP-CX875P Service Manual online
1-7
29
Ho
o
o
kups
Step 3: Connecting the Power Cord
Plug the player’s and the TV’s power cords into an AC outlet.
Step 4: Quick Setup
Follow the steps below to make the minimum number of basic adjustments for using the player.
To skip an adjustment, press
To skip an adjustment, press
>. To return to the previous adjustment, press ..
The on-screen display differs depending on the player model.
1
Turn on the TV.
2
Press
[/1.
3
Switch the input selector on your
TV so that the signal from the
player appears on the TV screen.
“Press [ENTER] to run QUICK SETUP.”
appears at the bottom of the screen. If this
message does not appear, select
“QUICK” under “SETUP” in the Control
Menu to run Quick Setup (page 89).
appears at the bottom of the screen. If this
message does not appear, select
“QUICK” under “SETUP” in the Control
Menu to run Quick Setup (page 89).
4
Press ENTER.
The Setup Display for selecting the
language used in the on-screen display
appears.
language used in the on-screen display
appears.
5
Press
X/x to select a language.
The player uses the language selected
here to display the menu and subtitles as
well.
here to display the menu and subtitles as
well.
6
Press ENTER.
The Setup Display for selecting the
aspect ratio of the TV to be connected
appears.
aspect ratio of the TV to be connected
appears.
LANGUAGE SETUP
OSD:
MENU:
AUDIO:
SUBTITLE:
MENU:
AUDIO:
SUBTITLE:
FRENCH
ENGLISH
ENGLISH
ENGLISH
SPANISH
PORTUGUESE
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
SCREEN SAVER:
BACKGROUND:
4:3 LETTER BOX
4:3 PAN SCAN
4:3 LETTER BOX
STARTUP SCREEN:
16:9
COMPONENT OUT:
MODE:
MODE:
AUTO
INTERLACE
c
continued
30
7
Press
X/x to select the setting that
matches your TV type.
◆ If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
• 4:3 LETTER BOX or 4:3 PAN SCAN
(page 90)
◆ If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
• 16:9 (page 90)
standard TV with a wide-screen mode
• 16:9 (page 90)
8
Press ENTER.
The Setup Display for selecting the type
of video signal appears.
of video signal appears.
9
Press
X/x to select the type of
signals you wish to output to your
TV.
Select “PROGRESSIVE” only if you
have made video connection
have made video connection
C (page 21)
and wish to view progressive video
signals.
◆ If you have an Interlace format TV
(standard TV)
• INTERLACE (page 91)
◆ If you have a Progressive format TV
• PROGRESSIVE (page 91)
signals.
◆ If you have an Interlace format TV
(standard TV)
• INTERLACE (page 91)
◆ If you have a Progressive format TV
• PROGRESSIVE (page 91)
10
Press ENTER.
The Setup Display for selecting the type
of jack used to connect your amplifier
(receiver) appears.
of jack used to connect your amplifier
(receiver) appears.
11
Press
X/x to select the type of
jack (if any) you are using to
connect to an amplifier (receiver),
then press ENTER.
Choose the item that matches the audio
connection you selected on pages 25 to
28 (
connection you selected on pages 25 to
28 (
through
).
• If you connect just a TV and nothing
else, select “NO.” Quick Setup is
finished and connections are complete.
finished and connections are complete.
• Select “AUDIO OUTPUT L/R.” Quick
Setup is finished and connections are
complete.
complete.
• Select “DIGITAL OUTPUT.” The Setup
Display for “DOLBY DIGITAL” appears.
12
Press
X/x to select the type of
Dolby Digital signal you wish to
send to your amplifier (receiver).
Choose the signal that matches the audio
connection you selected on pages 26 to
28 (
connection you selected on pages 26 to
28 (
through
).
• D-PCM (page 94)
• DOLBY DIGITAL (only if the
amplifier (receiver) has a Dolby Digital
decoder) (page 94)
decoder) (page 94)
13
Press ENTER.
“DTS” is selected.
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
SCREEN SAVER:
BACKGROUND:
4:3 LETTER BOX
JACKET PICTURE
ON
STARTUP SCREEN:
STANDARD
COMPONENT OUT:
MODE:
MODE:
INTERLACE
PROGRESSIVE
INTERLACE
YES
NO
Is this player connected to an amplifier
(receiver) ? Select the type of jack you
are using.
(receiver) ? Select the type of jack you
are using.
AUDIO OUTPUT L/R
DIGITAL OUTPUT
A
D
A
B-1
C-1
B-2
C-2
D
B
D
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
DTS:
DTS:
OFF
STANDARD
ON
DOWNMIX:
DOLBY SURROUND
DOLBY DIGITAL
D-PCM
D-PCM
B-2
C-2
D
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
DTS:
DTS:
OFF
STANDARD
ON
DOWNMIX:
DOLBY SURROUND
OFF
ON
OFF
D-PCM
31
Ho
o
o
kups
14
Press
X/x to select whether or
not you wish to send a DTS signal
to your amplifier (receiver).
Choose the item that matches the audio
connection you selected on pages 26 to
28 (
connection you selected on pages 26 to
28 (
through
).
• OFF (page 95)
• ON (only if the amplifier (receiver) has
a DTS decoder) (page 95)
15
Press ENTER.
Quick Setup is finished. All connections
and setup operations are complete.
and setup operations are complete.
Enjoying the surround sound
effects
effects
To enjoy the surround sound effects of this
player or your amplifier (receiver), set the
following items as described below for the
audio connection you selected on pages 26 to
28 (
player or your amplifier (receiver), set the
following items as described below for the
audio connection you selected on pages 26 to
28 (
through
). Each of these is the
default setting and does not need to be
adjusted when you first connect the player.
Refer to page 88 for using the Setup Display.
adjusted when you first connect the player.
Refer to page 88 for using the Setup Display.
Audio Connection (pages 25 to 28)
• No additional settings are needed.
• Set “DOWNMIX” to “DOLBY
SURROUND” (page 94).
• If the sound distorts even when the volume
is turned down, set “AUDIO ATT” to “ON”
(page 93).
(page 93).
• Set “DOWNMIX” to “DOLBY
SURROUND” (page 94).
• Set “DIGITAL OUT” to “ON” (page 94).
B
D
B-2
C-2
D
B
D
A
B-1
C-1
B-2
C-2
D
32
Playing Discs
Inserting Discs
You can insert up to 300 discs into the disc
slots in this player, not counting the EASY
PLAY slot.
slots in this player, not counting the EASY
PLAY slot.
1
Press
[/1
.
The player turns on.
2
Press OPEN/CLOSE.
The front cover opens.
The front cover opens.
3
Press DISC CHANGE.
The DISC CHANGE indicator lights up.
The DISC CHANGE indicator lights up.
4
Turn the
.–/>+ dial until you
find the disc slot where you want to
insert a disc, while checking the disc
slot number indicated on the front
panel display or by the slot.
insert a disc, while checking the disc
slot number indicated on the front
panel display or by the slot.
5
Insert a disc.
Gently place the disc all the way into the
slot and do not release the disc until it is
completely seated. Make sure you have
Gently place the disc all the way into the
slot and do not release the disc until it is
completely seated. Make sure you have
inserted the disc into each slot at a right
angle to the rotary table. If the disc is not
put in straight, it may damage the player
or the disc.
angle to the rotary table. If the disc is not
put in straight, it may damage the player
or the disc.
6
Repeat Steps 4 and 5 to insert more
discs.
discs.
7
Press OPEN/CLOSE.
The front cover closes. The rotary table
turns and the disc slot at the loading
position is set to the playing position.
The front cover closes. The rotary table
turns and the disc slot at the loading
position is set to the playing position.
z Hints
• In Step 4, you can select a disc slot number by
• In Step 4, you can select a disc slot number by
skipping 10 slots. After sliding the TV/DISC
EXPLORER/DVD switch to DISC EXPLORER
or DVD, press DISC SKIP +/– on the remote. 10
disc slots each before or after from the current
disc slot number will be skipped.
EXPLORER/DVD switch to DISC EXPLORER
or DVD, press DISC SKIP +/– on the remote. 10
disc slots each before or after from the current
disc slot number will be skipped.
• If you use a Sony 8 cm CD adaptor (not supplied),
you can play 8cm (3-inch) CDs with the EASY
PLAY slot (page 19).
PLAY slot (page 19).
Notes
• Do not turn the turntable by hand.
• Do not reach inside of the turntable compartment.
• Do not reach inside of the turntable compartment.
Always follow the correct steps for inserting and
removing discs.
removing discs.
• When transporting the player, remove all discs
from the player. Failure to remove the discs may
cause damage to the player.
cause damage to the player.
• When closing the front cover, be careful not to let
anything get caught between the door and the
player.
player.
.
–/
>
+ dial
Front cover
Disc slot
at the loading position
at the loading position
Disc slot number
With the playback side
facing left
facing left
Click on the first or last page to see other DVP-CX875P service manuals if exist.