DVP-CX860, DVP-CX870D (serv.man2) - Sony DVD Service Manual (repair manual). Page 48

Read Sony DVP-CX860 / DVP-CX870D (serv.man2) Service Manual online

— 50 —
At the same time when the BU holder moves, 
the chuck holder assy moves as shown in the 
arrow mark 
5
 around the portion 
E
 as the 
pivot, via the chuck driving link that is fixed to 
the BU holder with screw.
The slider (U) that is connected by the portion 
C
 of the 
slider link via the slider link, and the slider (B) that is 
connected by the portion 
D
, move in the directions of 
the arrow marks 
2
 and 
3
 respectively 
The BU holder moves in the direction of 
the arrow mark 
4
 as it is interlocked with the 
slider (B) and the slider (U) 
FIG.40
FIG.41
FIG.42
FIG.43
Cam drive motor (dc motor) starts rotating.
Chucking is released.
Gear (A) (cam drive motor side) rotates in the direction of the arrow mark 
1
.
The control gear (F) and control gear (R) start rotating in the direction of 
the arrow mark 
5
 respectively (arrow marks 
2
 to 
4
) via loading gear (B) 
(dam drive motor side), chuck gear (C) and chuck gear (D).
The loading frame (R) assy and guide 
frame (R) assy start moving upward 
along with the cam groove outside the 
control gear (R) as they are pushed 
by the force of the extension spring. 
(arrow mark 
1
At the same time, the disk stopper 
(rear side) is released (arrow mark 
2
).
I
The portion 
B
 of the slider link moves as 
shown in the arrow mark 
1
 around the 
boss of 
A
 as the pivot, along with the cam 
groove inside the control gear (F).
The lower portion of a disc moves up 
until it contacts with the timing belt of 
the loading guide (R) and supports 
the disc together with the stopper 
(front side).
3-8. Unloading (Rear side)
Page of 60
Display

Click on the first or last page to see other DVP-CX860 / DVP-CX870D (serv.man2) service manuals if exist.