DVP-C660, DVP-C670D, DVP-C675D - Sony DVD Service Manual (repair manual). Page 11

23

You can check information about the disc, such as the total
number of titles or tracks or remaining time, using the
front panel display.

Using the Front Panel Display Z 

Checking the remaining time
Press TIME/TEXT.

Each time you press TIME/TEXT while playing the disc, the
display changes as shown in the following chart.

Notes

• On some DVDs, the chapter number or time may not appear or

you may not be able to change the front panel display.

• While you are doing Shuffle Play or Program Play, the playing

time of the title and the remaining time of the title are not
displayed.

1

4

7

2

5

8

0

3

6

9

22

To go back to the menu
Press ORETURN, ., or >.

z

To cancel PBC playback of a VIDEO CD with PBC functions

and play the disc in continuous play mode

There are two ways.
• Before you start playing, select the track you want using .

or >, then press ENTER or H.

• Before you start playing, select the track number using the

number buttons on the remote, then press ENTER or H.
“Play without PBC” appears on the TV screen and the player
starts continuous play.  You cannot play still pictures such as a
menu.
To return to PBC playback, press x twice then press H.

Note

Depending on the VIDEO CD, “Press ENTER” in Step 3 may be
expressed as “Press SELECT” in the instructions supplied with
the disc. In this case, press H.

You can open the disc tray while playing a disc so that
you can check which discs are to be played next and
replace discs without interrupting playback of the current
disc.

Press EXCHANGE.
The disc tray opens and two disc compartments
appear.  Even if the player is playing a disc, it doesn’t
stop playing.

Press DISC SKIP.
The disc tray turns and another two disc
compartments appear.

Press EXCHANGE.
The disc tray closes.

z

While the disc tray is open after being opened with the

EXCHANGE button

• If the playback of the current disc ends, the player stops

playing.  If the disc is played in 1 DISC Repeat Play mode (page
49), the current disc starts playing again.

• In ALL DISCS Shuffle Play mode (page 48), titles/tracks/

chapters are reshuffled on the current disc.

• In Program Play mode (page 45), only the titles/tracks/

chapters on the current disc are played.

Note

Do not push the disc tray to close in Step 5, as you may damage
the player.

20

Some DVDs have a title menu or a DVD menu that is
provided with DVDs only.

A DVD is divided into long sections of a picture or a
music feature called “titles.”  When you play a DVD
which contains several titles, you can select the title you
want using the title menu.

Press TITLE.
The title menu appears on the TV screen.  The contents
of the menu vary from disc to disc.

Press </M/m/, to select the title you want to
play.
Depending on the disc, you can use the number
buttons to select the title.

Press ENTER.
The player starts playing the selected title.

Notes

• On some DVDs, you may not be able to select the title.
• On some DVDs, a “title menu” may simply be called a “menu”

or “title ” in the instructions supplied with the disc.  “Press
ENTER.” may also be expressed as “Press SELECT.”

<

/M/m/,

<

/M/m/,

Notes

• Resume Play may not be available on some DVDs.
• Resume Play is not available in Shuffle or Program Play mode.
• Depending on where you stopped the disc, the player may

resume playback from a different point.

• The point where you stopped playing is cleared when:

– you open or close the disc tray
– you turn the power off by pressing ! on the player
– you change the play mode
– you start playback after selecting a title, chapter or track
– you change the settings in the setup display
– you press DISC EXPLORER
– you load disc information by pressing LOAD
– you press MEGA CONTROL (CTL)

21

Some DVDs allow you to select the disc contents using a
menu.  When you play these DVDs, you can select the
language for the subtitles, the language for the sound, etc.,
using the DVD menu.

Press DVD MENU.
The DVD menu appears on the TV screen.  The
contents of the menu vary from disc to disc.

Press </M/m/, to select the item you want to
change.
Depending on the disc, you can use the number
buttons to select the item.

z

If you want to select the language for the DVD menu

Change the setting using “DVD MENU” in “LANGUAGE
SETUP” in the setup display.  For details, see page 59.

Note

Depending on the DVD, a “DVD menu” may simply be called a
“menu” in the instructions supplied with the disc.

<

/M/m/,

<

/M/m/,

When playing VIDEO CDs with PBC (Play Back Control)
functions (Ver. 2.0 discs), you can enjoy simple interactive
operations, search functions, and other such operations.
PBC Playback allows you to play VIDEO CDs
interactively by following the menu on the TV screen.
On this player, you can use the number buttons, ENTER,
., >, M/m and ORETURN during PBC Playback.

Select the item number you want.
Press M/m to select the item number.
You can also select the item number with the number
buttons on the remote.

Follow the instructions in the menu for interactive
operations.
Refer to the instructions supplied with the disc, as the
operating procedure may differ according to the
VIDEO CD.

.

/>

M

/m

O

.

/>

M

/m

H

H

 ORETURN

1

4

7

2

5

8

0

3

6

9