AVD-K600P - Sony DVD Service Manual (repair manual). Page 13

13

1) PG Adjustment

• Adjustment And Specification

• Test Equipment

a) OSCILLOSCOPE

b) NTSC MODEL : NTSC SP TEST TAPE

PLAY

a) Insert the SP Test Tape and play.
b) Connect the CH1 of the oscilloscope to the H/SW(W373, W374) and CH2 to the Video Out for the VCR.
c) Trigger the mixed Combo Video Signal of CH2 to the CH1 H/SW(W373, W374), and then check the dis-

tance (time difference), which is from the selected A(B) Head point of the H/SW(W373, W374) signal to
the starting point of the vertical synchronized signal, to 6.5H 

±

0.5H (412

µ

s, 1H=63

µ

s).

Note - Press FRONT CH UP KEY and FRONT PLAY KEY on Deck playback, and it goes in to ATR PRE-

SET. after the SP Test Tape is inserted.

a-1) Payback the SP standard tape
b-2) Press the “O” key on the Remote controller and the “PLAY” key on the Front Panel the same time,

then it goes in to Tracking initial mode.  

c-3) Repeat the above step(No.b-2), then it finishes the PG adjusting automatically.
d-4) Stop the playback, then it goes out to PG adjusting mode after mony the PG data.

V.Out

H/SW(W373, W374)

R/C TRK JIG KEY

6.5 

±

0.5H

 V.Out

 H/SW(W373, W374)

OSCILLOSCOPE

CH1 CH2

V.out

H/SW

R/C KEY

(W373, W374)

H/SW

Composite

VIDEO

6.5H(412

µ

s)