Read Sony AVD-C700ES Service Manual online
7
AVD-C700ES
5. SERVICING POSITION OF CDM
LINK board
Ver 1.1
6. DECISION TO PASS OR FAIL OF THE OPTICAL PICK-UP BLOCK
oscilloscope
+
MB board
CN1013 pin 1
–
CN1013 pin 3
CD : 1.05
±
0.2 Vp-p
VOLT/DIV : 200 mV
TIME/DIV : 500 nS
TIME/DIV : 500 nS
DVD : 1.09
±
0.2 Vp-p
RF signal waveform
– MB BOARD (SIDE A) –
CN1013
1
7
Connection:
Procedure:
1. Connect an oscilloscope to test point 1 pin and 3 pin of
1. Connect an oscilloscope to test point 1 pin and 3 pin of
CN1013 on the MB board.
2. Turn the power on.
3. Put the disc (LUV-P01) (Part No.: 4-999-032-01) (CD) in to
3. Put the disc (LUV-P01) (Part No.: 4-999-032-01) (CD) in to
playback.
4. Confirm that oscilloscope waveform is clear and check RF
signal level is correct or not.
5. Put the disc (TDV-520CSO) (Part No.: J-2501-236-A) (DVD)
in to playback.
6. Perform Comfirmation in the same manner as step 4.
Note:
A clear RF signal waveform means that the shape “
◊” can be clearly
distinguished at the center of the waveform.
Checking Location:
Click on the first or last page to see other AVD-C700ES service manuals if exist.