Read Sony SLT-A35 / SLT-A35K / SLT-A35Y Service Manual online
SLT-A35/A35K/A35Y_L2
1-3E
– ENGLISH –
1-6. METHOD FOR REPLACING THE AS HOLDER ACTUATOR ASSY
Assembly Procedure
Note: Make sure to perform the assembly procedures after assembling the AS Holder Actuator Assy.
The assembly procedure is the reverse of the removal procedure.
Apply grease to the portions indicated below.
Apply grease to the portions indicated below.
∗ After applying grease, attach the Ball Bearings.
Ball Bearing
G
G-15
AS Slider B Assy
G
G-15 and G G-116
∗ After applying grease, attach the Ball Bearings.
Ball Bearing
G
G-15
Ball Bearing
G
G-15
Removal Procedure
Note: Make sure to perform the removal procedures after removing the
AS Slider B Assy.
(1) Remove the solder on the enamel wires at two places.
Solder
(2) Remove the flexible board from the hook on the AS Holder Actuator
Assy.
Assy.
Hook
(3) Remove the four screws to remove the AS Holder Actuator Assy.
AS Holder Actuator Assy
Assembly Procedure
Note: Make sure to perform the assembly procedures before assembling
the AS Slider B Assy.
The assembly procedure is the reverse of the removal procedure.
Apply grease to the portions indicated below.
Apply grease to the portions indicated below.
AS Holder Actuator Assy
G
G-15 and G G-116
Click on the first or last page to see other SLT-A35 / SLT-A35K / SLT-A35Y service manuals if exist.