Read Sony SAL70200G2 Service Manual online
5-1
SAL70200G2 (2.8/70-200 G SSM Ⅱ) (70-200mm F2.8 G SSM II)
Note:
After repairing, perform the adjustments refer to this section.
5-1. PREPARATION
5-1-1. Equipment/Tool list
• Variable Transformer (Output voltage: 100 V AC) (Note 3)
• Camera (One of DSLR-A700, SLT-A37/A57/A58/A65/A77/A99)
•
• Camera (One of DSLR-A700, SLT-A37/A57/A58/A65/A77/A99)
•
Memory Card
• Screen (Art post paper)
•
•
Tape Measure
• Plane Mirror (For SLRs)
• Adhesive bond (B-10): J-6082-612-A
• Lens Adjustment Program (ACSSM-S-VerXXX.zip)
• Color Calculator 2
Note:
• Adhesive bond (B-10): J-6082-612-A
• Lens Adjustment Program (ACSSM-S-VerXXX.zip)
• Color Calculator 2
Note:
Acquire the Color Calculator 2 and Lens adjustment program from the each HQ.
J-1
J-2
J-3
J-4
J-5
J-6
J-7
J-8
J-9
J-10
J-11
J-12
J-13
J-14
J-15
20
30
40
50
60
70
80
90
0
10
Maximum
Aperture jig
J-6082-640-A
Aperture jig
J-6082-640-A
Chip-B for
universal wrench:
J-6082-609-2
universal wrench:
J-6082-609-2
Personal computer
(Note 1)
(Note 1)
Luminance Box
J-6082-581-A
J-6082-581-A
AE Master Lens
J-6082-597-A
J-6082-597-A
1000 mm Collimator
110V: J-6082-604-A
240V: J-6082-604-B
(Note 2)
110V: J-6082-604-A
240V: J-6082-604-B
(Note 2)
Lens Test Projector
J-6082-605-A
(Note 3)
J-6082-605-A
(Note 3)
Flange Back
Tester
J-6082-606-A
Tester
J-6082-606-A
A-Mount
Attachment
J-6082-607-A
Attachment
J-6082-607-A
Flange Back Gauge
(43.50 mm)
J-6082-608-A
(43.50 mm)
J-6082-608-A
Finished
Inspection Jig
J-6082-710-A
(Note 4)
Inspection Jig
J-6082-710-A
(Note 4)
M-Box Jig
J-6082-722-A
(Note 5)
J-6082-722-A
(Note 5)
Universal
Wrench
J-6082-609-A
Wrench
J-6082-609-A
Chip-A for
Universal Wrench
J-6082-609-1
Universal Wrench
J-6082-609-1
Chip-C for
universal wrench:
J-6082-609-3
universal wrench:
J-6082-609-3
Fig.
5-1-1
J-16
J-18
J-17
J-19
J-20
J-21
SSM Height ADJ
Harpoon Jig
J-6082-688-A
Harpoon Jig
J-6082-688-A
SSM Height
Adjustment Jig
J-6082-691-A
Adjustment Jig
J-6082-691-A
SSM Height
Adjustment
Measurement JIG
J-6082-689-A
Adjustment
Measurement JIG
J-6082-689-A
Height Adjustment
JIG (Ring)
J-6082-693-A
JIG (Ring)
J-6082-693-A
Height Adjustment
JIG (Cap)
J-6082-696-A
JIG (Cap)
J-6082-696-A
G1 Holding JIG
J-6082-671-A
J-6082-671-A
Fig.
5-1-2
Note 1:
Personal computer (PC) (Color Calculator 2 installed)
OS:
Windows
Vista/7
MEMORY:
40 MB or more recommended
Hard disk free area: 15 MB or more recommended
USB terminal:
Standard equipment
Graphics:
32,000 color or more recommended VGA monitor
Note 2:
Attach the chart to the 1000 mm Collimator as shown in Fig. 5-1-3.
Align the marks
1000 mm collimator
Chart
Fig.
5-1-3
Note 3:
Connect the variable transformer (Output voltage: AC 100 V) to the Lens Test Projector.
Note 4:
The Finished Inspection Jig II is dedicated for AC 100 V.
Note 5:
M-Box Jig is available in use for Finished Inspection Jig II (J-6082-710-A).
5. ADJUSTMENTS
Ver. 1.1 2015.07
Click on the first or last page to see other SAL70200G2 service manuals if exist.