Read Sony SAL50M28 Service Manual online
HELP
SAL50M28 (MACRO 2.8/50) (50mm F2.8 Macro)
HELP37
Adhesive bond (B-40): J-6082-614-A
1.
Attach the first cam ring linkage plate block to the first cam ring, and apply the adhesive bond (B-40) to the two screws and tighten
them as shown in the figure.
Note:
Attach the pin of the first cam ring linkage plate block to the wide chamfered edge side of the first cam ring.
2.
Install the first cam ring so that the post of the first cam ring linkage plate block fits into groove A of the inner barrel. Then install it
with the first cam ring adjust washer.
HELP38
Adhesive bond (B-40): J-6082-614-A
Attach the front lens barrel, and apply the adhesive bond (B-40) to the three screws and tighten them as shown in the figure.
Apply the
adhesive bond (B-40)
adhesive bond (B-40)
Chamfered edge (Wide)
Chamfered edge
(Narrow)
(Narrow)
First Cam Ring
First Cam Ring
Adjust Washer
Adjust Washer
1st Cam Ring Hold Ring
First Cam Ring
Aperture Inner Barrel
Inner Barrel
Pin
Groove A
Groove A
First Cam Ring Linkage
Plate Block
Plate Block
Apply the
adhesive
bond (B-40)
adhesive
bond (B-40)
Front Lens Barrel
Click on the first or last page to see other SAL50M28 service manuals if exist.