Read Sony SAL50M28 Service Manual online
HELP
SAL50M28 (MACRO 2.8/50) (50mm F2.8 Macro)
5.
Align the projection of the torque ring block and the groove of the focus ring as shown in the figure, and attach it.
6.
Check wobbles of the three pinch lever assemblies. Then use the adjustment screw for adjustment. (Make sure the float ring does not
rotate accordingly when turning the torque ring by any slipping lever block.)
HELP09
Adhesive bond (B-40): J-6082-614-A
Apply the adhesive bond (B-40) to the four screws.
A adjustment pin is turned
and wobbles is adjusted.
and wobbles is adjusted.
Adjustment Pin
Float Ring
Torque Ring
Slipping Lever Block
Apply the
adhesive
bond (B-40)
adhesive
bond (B-40)
Apply the
adhesive
bond (B-40)
adhesive
bond (B-40)
Groove
Focus Ring
Projection part
Click on the first or last page to see other SAL50M28 service manuals if exist.