Read Sony SAL50M28 Service Manual online
HELP
SAL50M28 (MACRO 2.8/50) (50mm F2.8 Macro)
HELP08
Grease (G-15):
J-6082-619-A
Adhesive bond (B-10): J-6082-612-A
1.
Install the MF operation ring so that the slipping lever block fit into the groove of the MF operation ring. After installation, ensure the
three pinch lever assemblies are securely fit it.
2.
Loosen the two screws, then reposition the slipping lever block so that the MF operation ring can be installed smoothly.
3.
After adjustment, apply the adhesive bond (B-10) to the two screws.
4.
Apply the adhesive bond (B-10) and grease (G-15) to the instruction part of the anti slip spring as shown in the figure.
Clip Lever
MF Operation Ring
It shifts and adjusts to right and left.
Slipping Lever Blcck
Two screws
Apply the
adhesive
bond (B-10)
adhesive
bond (B-10)
Apply the
adhesive
bond (B-10)
adhesive
bond (B-10)
Apply the grease (G-15)
(Slide portion of the anti slip spring)
(Slide portion of the anti slip spring)
Apply the
adhesive
bond (B-10)
(Screw portion)
adhesive
bond (B-10)
(Screw portion)
Click on the first or last page to see other SAL50M28 service manuals if exist.