Read Sony SAL50F18 Service Manual online
HELP
SAL50F18 (DT 1.8/50 SAM) (DT 50mm F1.8 SAM)
HELP03
How to remove the switch panel block (Scar prevention)
1.
Remove three screws fixing the rear mirror assy tube.
2.
Set the switch panel block to “AF”.
3.
Hold down the midway mirror tube and pull up the rear mirror assy tube slightly to the direction of the mount until the
indicated hole of rear mirror assy tube is seen.
4.
Insert tweezers or a narrow tip stick in the hole of rear mirror assy tube and peel the switch panel block by pushing it from the inside
with the tweezers or the narrow tip stick.
Note on the switch panel block installation
1.
Set the select switch of DC motor (geared) to AF.
2.
Set the knob of switch panel block to AF.
3.
Peel the released paper off the switch panel block and install the switch panel block.
Midway Mirror Tube
Direction of the mount
Rear Mirror Assy Tube
Switch Panel Block
Narrow tip stick
Hole
Select switch of
DC Motor (Geared)
DC Motor (Geared)
Knob
Switch Panel Block
AF Side
MF Side
Click on the first or last page to see other SAL50F18 service manuals if exist.