Read Sony SAL500F80 Service Manual online
HELP
SAL500F80 (REFLEX 8/500) (500mm F8 Reflex)
HELP
Note for assembling and grease applying positions are shown.
HELP01
Adhesive bond (B-40): J-6082-614-A
1.
Attach the rear light shield barrel. Apply the adhesive bond (B-40) to the three screws, and then fix the rear light shield barrel with
these screws as shown in the figure.
2.
Attach the ground spring to the rear light shield barrel.
3.
Attach the signal PC board, and fix it with the two screws as shown in the figure.
Note:
Be careful not to tighten the two screws too much.
Apply the Adhesive Bond
(B-40) (Three areas)
(B-40) (Three areas)
Signal PC Board
Screws
Ground spring
Rear Light Shield Barrel
Click on the first or last page to see other SAL500F80 service manuals if exist.