Read Sony SAL500F80 Service Manual online
HELP
SAL500F80 (REFLEX 8/500) (500mm F8 Reflex)
HELP03
Anti-diffusion agent (A-20): J-6082-611-A
Grease (G-85):
J-6082-626-A
Adhesive bond (LOCTITE 460)(Note)
Note:
Use the adhesive bond (LOCTITE 460) or an equivalent article.
Do not use what becomes white after drying like quick-drying glue.
1.
Apply the adhesive bond (LOCTITE 460) to the instruction portion of the stopper screw as shown in the figure
2.
Apply the anti-diffusion agent (A-20) to the instruction portion of the mount block as shown in the figure.
3.
Apply the grease (G-85) under the three claws of the mount block as shown in the figure.
4.
Attach the mount block with the four screws as shown in the figure.
Apply the Grease (G-85) (Under three claws)
Apply the Grease (G-85)
Apply the Anti-Diffusion Agent (A-20)
Apply the Anti-Diffusion Agent (A-20) (All circumference of back side)
Apply the Adhesive Bond
(LOCTITE 460)
(LOCTITE 460)
Click on the first or last page to see other SAL500F80 service manuals if exist.