Read Sony SAL35F14G Service Manual online
HELP
SAL35F14G (1.4/35G) (35mm F1.4G)
HELP20
Adhesive bond (LOCTITE 460) (Note)
Note:
Use adhesive bond (LOCTITE 460) or an equivalent article.
Do not use what becomes white after drying like quick-drying glue.
Apply the adhesive bond (LOCTITE 460) to the tip of mount index and install it to the outer barrel and G decoration ring.
HELP21
Adhesive bond (LOCTITE 460) (Note)
Note:
Use adhesive bond (LOCTITE 460) or an equivalent article.
Do not use what becomes white after drying like quick-drying glue.
Adhesive bond (B-10): J-6082-612-A
1.
Apply a little amount of the adhesive bond (LOCTITE 460) to the indicated portions of focus hold button base.
2.
Apply the adhesive bond (B-10) to the tip of one screw shown in figure and tighten the screw.
3.
Perform “4-8. FOCUS HOLD BUTTON CHECK (FOCUS HOLD BUTTON)”.
ft
m
Mount Index
Apply the adhesive bond (LOCTITE 460)
to the tip of mount index
to the tip of mount index
Outer Barrel and G Decoration Ring
Focus Hold Button Base
Click Plate
Dust Proofing Tape
Focus Hold Button
Washer
Apply the adhesive bond (B-10)
Apply the adhesive bond (LOCTITE 460)
Click on the first or last page to see other SAL35F14G service manuals if exist.