Read Sony SAL20TC Service Manual online
HELP
SAL20TC (2x TELE CONVERTER) (2 X Teleconverter)
HELP17
Adhesive bond (LOCTITE 460)
Note:
Use adhesive bond (LOCTITE 460) or an equivalent aeticle.
Don’t use what becomes white after drying like a quick-drying giue.
Anti-diffusion agent (A-20): J-6082-611-A
1.
Apply the adhesive bond (LOCTITE 460) to the stopper screw and tighten it.
2.
Apply the anti-diffusion (A-20) to the instruction part of the lens mount block.
3.
Four screws that installs lens mount block tighten in numberical order shown in the figure.
HELP18
Anti-diffusion agent (A-20): J-6082-611-A
1.
Apply the anti-diffusion agent (A-20) to the instrction part of the fixed barrel.
2.
BL contact holder block and ground spring A are put and after building in, protector rubber is installed in fixed barrel.
Note:
Be careful not to damage A part of fixed tube.
HELP19
It is done up that the point of lock spring is thin.
Apply the anti-diffusion agent (A-20)
Fixed Barrel
Protector Rubber
A part
Apply the anti-diffusion agent (A-20)
(All circumference of threaded portion)
(All circumference of threaded portion)
Apply the adhesive bond (LOCTITE 460)
1
2
3
4
Coupler Hole
Lock Spring
Connect Ring
Click on the first or last page to see other SAL20TC service manuals if exist.