Read Sony SAL1855 Service Manual online
HELP
SAL1855 (DT 3.5-5.6/18-55 SAM) (DT 18-55mm F3.5-5.6 SAM)
HELP04
1.
While inserting the aperture interlocking fork in the aperture lever, install the mount block.
2.
Select 1 to 2 pieces of back adjustment washer to make a combination of specified thickness.
Note:
The amount of back adjustment washer differs depending on the adjustment. (Refer to the flange back adjustment.)
3.
Push the back adjustment washers in between the boss and the Mount Block. (3 locations)
Note:
When stacking several pieces of back adjustment washer, install the washers so that thin one comes at the outer side.
4.
Tighten the mount block with three screws.
5.
Connect the ZF Flexible PWB to the connector of the CL-005 Mount.
Mount Block
Aperture Interlocking Fork
Aperture Lever
Back Adjustment Washer
Mount Block
ZF Flexible PWB
Back Adjustment Washer
Back Adjustment
Washer
Washer
Connector of
CL-005 Mount
CL-005 Mount
Boss
Thin
Thick
Click on the first or last page to see other SAL1855 service manuals if exist.