Read Sony SAL18250 Service Manual online
HELP
SAL18250 (3.5-6.3/18-250) (DT 18-250mm F3.5-6.3)
HELP02-02
1.
Break off the zoom brush to separate into the brush part and the cover part.
2.
Set the assy to the Tele end.
3.
Place the Brush part (Zoom Brush) at the reference point and fix it with the brush tape.
4.
Place the Cover part (Zoom Brush) and fix it with the setting tape B.
5.
Perform the check/adjustment of zoom brush position.
Note:
For check/adjustment, refer to [4-7. ZOOM BRUSH POSITION CHECK/ADJUSTMENT].
Zoom Ring
Cross Section of brush
Reference point
Incision part of pattern
Z.ECD PCB
Setting Tape B
Brush Tape
Brush Tape
Cover part (Zoom Brush)
Brush part (Zoom Brush)
Separate into the brush
part and the cover part
part and the cover part
Brush part
(Zoom Brush)
(Zoom Brush)
Cover part
(Zoom Brush)
(Zoom Brush)
Brush part
(Zoom Brush)
(Zoom Brush)
Click on the first or last page to see other SAL18250 service manuals if exist.