Read Sony SAL18250 Service Manual online
HELP
SAL18250 (3.5-6.3/18-250) (DT 18-250mm F3.5-6.3)
HELP01-03
Adhesive bond (LOCTITE 460)
Note:
Use the bond (LOCTITE 460) or the equivalent.
Do not use the instant glue that becomes white after dried.
1.
Apply the adhesive bond (LOCTITE 460) to the rear lens barrel assy and affix the mount index.
Note:
Be careful not to apply too much bond. Be careful for the bond not to seep out.
2.
Set the focus to near position.
3.
Thread the Z.ECD and F.ECD flexible board through the hole of rear lens barrel assy and fix them with five screws.
Note:
Tighten five screws in order of a
t b t c t d t e t a.
Main Assy
Rear Lens
Barrel Assy
Barrel Assy
Screw
Screws
d
b
Taking out hole of the
Z.ECD Flexible Board
Z.ECD Flexible Board
Taking out hole of the
F.ECD Flexible Board
F.ECD Flexible Board
c
a
e
Screws
Mount Index
Apply the Adhesive Bond
(LOCTITE460)
(LOCTITE460)
Set the focus to
near position.
near position.
Two Flexible Board
Click on the first or last page to see other SAL18250 service manuals if exist.