Read Sony SAL135F28 Service Manual online
4-35
SAL135F28 (STF 2.8(T4.5)/135) (135mm F2.8 [T4.5] STF)
4)
When the Infinity position check finishes normally, the message “Move FOCUS to Near position at about 5sec.” is displayed on the
pop-up window.
Set the focus to the near position and press down the ENTER key.
Fig.4-6-5
5)
When the near position check finishes normally, the message “Reverse FOCUS to infinity position at about 5sec.” is displayed on the
pop-up window.
Set the focus to the infinitly position and press down the ENTER key.
Fig.4-6-6
6)
When the infinity position check finishes normally, “OK” is displayed on the pop-up window, and press the ENTER key to return to
the initial window.
Fig.4-6-7
3. In case of error display in the Focus Pattern (infinity position first try)
1)
When the error display and the NG display appear to the pop-up window, press the ENTER key to return to the initial window, and
perform “2. Checking Method”again.
Fig.4-6-8
Fig.4-6-9
2)
Although the focus is positioned at the infinity position, if “NG” appears, confirm or perform the following.
• Cleaning of flexible pattern or the brush.
• Replacing the brush.
• Replacing the main flexible unit.
3)
Perform “2. Checking Method”again, repeat the inspection until “OK” appears on the pop-up window.
Click on the first or last page to see other SAL135F28 service manuals if exist.