Read Sony SAL135F28 Service Manual online
HELP
SAL135F28 (STF 2.8(T4.5)/135) (135mm F2.8 [T4.5] STF)
HELP22
Adhesive bond (B-10): J-6082-612-A
1.
Attach the nine A iris feather blocks to the apeture hold ring.
Note:
Attach the A iris feather blocks in fully opening condition.
2.
Attach the A iris control plate to the aperture hold ring at the position shown in the figure.
3.
Put the projection of the assembled A iris feather block into the notch of the A aperture operating plate, and tighten it with the three
screws.
Note:
Insert A aperture operating plate into a hole on 2nd lens holder, as shown in the figure. And then attach A iris retainer plate to
them.
4.
Perform the “4-2-2. Aperture Diameter Adjustment”.
5.
Apply the adhesive bond (B-10) to the head of the screws.
A Aperture Operating Plate
Aperture Hold Ring
A Iris Feather Block
Iris Control Plate Block
2nd Lens Holder
Apply the Adhesive Bond
(B-10) (Three areas)
(B-10) (Three areas)
2nd Lens Holder
Insert in this hole
(This hole is for M iris)
Click on the first or last page to see other SAL135F28 service manuals if exist.