Read Sony SAL135F28 Service Manual online
HELP
SAL135F28 (STF 2.8(T4.5)/135) (135mm F2.8 [T4.5] STF)
HELP21
Adhesive bond (B-10): J-6082-612-A
1.
Attach the ten M iris feather blocks to the M aperture unit holding.
Note: Attach the M iris feather blocks in fully opening condition.
2.
Attach the M aperture operation plate to the M aperture unit holding plate at the position shown in the figure.
3.
Put the projection of the assembled the M diaphragm blade block into the notch of the M aperture lever, and tighten it with the three
screws.
Note:
Insert A aperture operating plate into a hole on 2nd lens holder, as shown in the figure. Then attach M aperture unit holding
plate to them.
4.
Perform the “4-2-3. M Aperture Diameter Adjustment”.
5.
Apply the adhesive bond (B-10) to the head of the screws.
M Aperture Unit Holding Plate
M Iris Feather Blocks
M Aperture Operation Plate
2 Group Move Frame Block
M Apeature Lever
Apply the Adhesive Bond
(B-10) (Three areas)
(B-10) (Three areas)
Insert in this hole
(This hole is for A iris)
2nd Lens Holder
Click on the first or last page to see other SAL135F28 service manuals if exist.