Read Sony SAL135F18Z Service Manual online
4-39
SAL135F18Z (Sonnar 1.8/135 ZA) (Sonnar T
*
135mm F1.8 ZA)
4)
When the near position check finishes normally, the messege “Move FOCUS to Infinity position at about 5sec.” is displayed on the
pop-up window. Set the focus to the infinity position and press down the ENTER key.
Fig.4-10-4
5)
When the focus hold button check finishes normally, “OK” is displayed on the pop-up window.
Fig.4-10-5
3. In case of error display in the Focus Hold Button Short (near position)
1)
When the error display and the NG display appear to the pop-up window, press the ENTER key to return to the initial window, and
perform “2. Checking Method”again.
Fig.4-10-6
Fig.4-10-7
2)
Although the lens is positioned at the near position, if “NG” appears, confirm or perform the following.
• 4-8-1. Focus Brush Position Adjustment
• Cleaning of flexible pattern or the brush.
• Replaceing the brush.
• Rotating operation error of the focus ring (rotation speed is not suitable at a regulated speed.).
3)
Perform “2. Checking Method”again, repeat the inspection until “OK” appears on the pop-up window.
Click on the first or last page to see other SAL135F18Z service manuals if exist.