Read Sony NEX-5R / NEX-5RK / NEX-5RL / NEX-5RY (serv.man2) Service Manual online
NEX-5R/5RK/5RL/5RY_L2
1-3
1-5. PRECAUTION ON REPLACING THE CABINET FRONT
Perform the following procedures for each of the three washers.
Note: Measure the dimensions before replacement of the Cabinet Front according to procedures (1) to (3).
(1) Remove the Imager Block Assy and the IM Adjust Washers (A, B, C).
(2) Measure the dimensions (A) of the removed IM Adjust Washers.
A
+
B
B
A
(3) Measure the distance (B) between the surface of the screw hole where the IM Adjust Washers were set and the surface of the E-Mount.
(4) Likewise, measure the dimensions (B’) of each location where IM Adjust Washers of new Cabinet Front are installed.
(5) Calculate the dimension of (A’) of new IM Adjust Washer by using the formula below, and select the washers.
(4) Likewise, measure the dimensions (B’) of each location where IM Adjust Washers of new Cabinet Front are installed.
(5) Calculate the dimension of (A’) of new IM Adjust Washer by using the formula below, and select the washers.
Dimension
(A+B) before replacement – Dimension (B’) of new Cabinet Front
= Dimension (A’) of IM Adjust Washer after replacement
(6) Assemble the imager, using the selected IM Adjust Washers.
(7) After assembling is completed, perform the test shooting and confirm that no blur is observed in the peripheral area of shot.
(7) After assembling is completed, perform the test shooting and confirm that no blur is observed in the peripheral area of shot.
– ENGLISH –
1-4. CHECKING THE Wi-Fi FUNCTION
Perform the following procedure to check the Wi-Fi function.
Required equipment: Windows personal computer with Wi-Fi interface
1. Turn on the power of the unit.
2. Select the “Playback” on the menu, and select the “View on Smartphone”.
3. The view on smartphone screen is displayed.
4. Touch “This image” on the view on smartphone screen to open the “Wi-Fi Standby…” screen.
5. When preparation for Wi-Fi has been completed, the “Running as an access point.” screen opens and a password for Wi-Fi connection is displayed.
2. Select the “Playback” on the menu, and select the “View on Smartphone”.
3. The view on smartphone screen is displayed.
4. Touch “This image” on the view on smartphone screen to open the “Wi-Fi Standby…” screen.
5. When preparation for Wi-Fi has been completed, the “Running as an access point.” screen opens and a password for Wi-Fi connection is displayed.
When preparation for Wi-Fi has been completed, the following screen opens and a password for Wi-Fi connection is displayed.
View on Smartphone
Awaiting connection to the smartphone.
Running as an access point.
SSID
DIRECT-axE0:NEX-XXX
Password
XXXXXXXX
Device Name
NEX-XXX
Wi-Fi
6. Confirm on the personal computer that the unit is detected as a connectable wireless network.
7. To further confirm that the unit is connectable, connect the unit to the personal computer and select “Network and Internet” → “Manage Wireless
7. To further confirm that the unit is connectable, connect the unit to the personal computer and select “Network and Internet” → “Manage Wireless
Networks” from Control Panel to open the network connection list. The unit is included in the list.
Click on the first or last page to see other NEX-5R / NEX-5RK / NEX-5RL / NEX-5RY (serv.man2) service manuals if exist.