Read Sony NEX-3 / NEX-3A / NEX-3D / NEX-3K / NEX-5 / NEX-5A / NEX-5CK / NEX-5D / NEX-5H / NEX-5K (serv.man2) Service Manual online
NEX-3A/3D/3K/5A/5D/5CD/5K/5CK/5H_L2
3-4
Hold here
Assembly-28: MB N Contact Unit holding position
MB N Contact Unit
Insert IS-075 Flexible Board into the connector on
IM Imager Unit 14M, then lock the connector.
Assemble Heat Sink and IM Imager Unit 14M.
Note: IS-075 Flexible Board can not be inserted after
assembling Heat Sink.
Heat Sink
IM Imager Unit 14M
IS-075 Flexible Board
Assembly-30: Prior
Insertion of IS-075 Flexible Board
(NEX-3A/3D/3K)
Radiation Sheet (IS)
Heat Sink
Without running off the
edge of the hole.
Without running on the
edge of Heat Sink.
Assembly-31: Radiation
Sheet (IS) putting position
SY-258 Complete Board
CN-439 Complete Board
Put the surplus part of the
shutter flexible board under
SY-258 Complete Board.
Assembly-32: How to handle the Shutter Flexible Board
(NEX-3A/3D/3K)
Assembly-29: Note when assembling Heat Sink
Align with the positioning hole.
Heat Sink
CN-439
Complete Board
LC Connector
Insulating Sheet
BT Frame Assy
Within 0.5mm
Within 0.5mm
Assembly-33: LC Connector
Insulating Sheet
putting position
Assembly-34: Tape AS (210) putting position
(NEX-5A/5D/
5CD
/5K/5CK/
5H
)
Tape AS (210)
Without protruding
from the rib top surface.
Without running off
the mask sheet.
Without running on this boss.
Assembly-35: Method of attachment of LC Flexible
Insulating Sheet
(NEX-3A/3D/3K)
Bend the LC Flexible Insulating Sheet along
the curve of BT-063 Flexible Board.
LC Flexible
Insulating Sheet
±1.0mm
The changed portions from
Ver.1.4 are shown in blue.
Ver.1.5 2011.01
Click on the first or last page to see other NEX-3 / NEX-3A / NEX-3D / NEX-3K / NEX-5 / NEX-5A / NEX-5CK / NEX-5D / NEX-5H / NEX-5K (serv.man2) service manuals if exist.