Read Sony NEX-3 / NEX-3A / NEX-3D / NEX-3K / NEX-5 / NEX-5A / NEX-5CK / NEX-5D / NEX-5H / NEX-5K (serv.man2) Service Manual online
NEX-3A/3D/3K/5A/5D/5CD/5K/5CK/5H_L2
3-3
Assembly-20: Routing of Microphone Harness
(NEX-3A/3D/3K)
Microphone
Cabinet (Upper) Assy
Insert the surplus part into
the hole as shown here.
Route the harnesses under the
two ribs of Cabinet (Upper) Assy.
Cabinet (Upper) Assy
RL Block Assy
Note: Make sure that the PW Knob
is turned to OFF position
when assembling Cabinet
(Upper) Assy to RL Block
Assy.
PW Knob
Assembly-21: Assemble Cabinet (Upper) Assy
(NEX-3A/3D/3K)
Assembly-22: Radiation Sheet (CN) (210)
putting position
(NEX-3A/3D/3K)
CN-439 Complete Board
FP-1246
Flexible Board
Radiation Sheet
(CN) (210)
Within 1.0mm
Without running on the
reinforcement board
Within 1.0mm
Cabinet (Front)
IM Adjust Washer B
IM Adjust Washer A
IM Adjust Washer C
Assembly-23: IM Adjust Washer (A, B, C)
putting position
Assembly-25:
BT Slider Sheet (front) putting position
(NEX-5A/5D/
5CD
/5K/5CK/
5H
)
BT Slider Sheet (front)
Rib edge (horizontal):
±0.5mm
Rib edge (vertical):
±0.5mm
Lib edge (vertical):
±0.5mm
MB N Plate SP
Assembly-27:
Apply grease on MB N Plate SP
G
G-85
(J-6082-626-A)
BT Slider Sheet
(horizontal)
Cabinet (Front)
Assembly-26:
BT Slider Sheet (horizontal)
putting position
(NEX-5A/5D/
5CD
/5K/5CK/
5H
)
From edge
(vertical):
±1.0mm
From edge
(horizontal):
±1.0mm
J-6082-735-A
MB Mask Sheet
Note: There should not be any misalignment when attaching
MB Mask Sheet.
MB Mask
Sheet Tape
Cabinet (Front)
Assembly-24:
Method of attachment of MB Mask Sheet
The changed portions from
Ver.1.4 are shown in blue.
Ver.1.5 2011.01
Click on the first or last page to see other NEX-3 / NEX-3A / NEX-3D / NEX-3K / NEX-5 / NEX-5A / NEX-5CK / NEX-5D / NEX-5H / NEX-5K (serv.man2) service manuals if exist.