Read Sony ILCE-7S (serv.man2) Service Manual online
ILCE-7S_L2
3-1
3. ASSEMBLY
Assembly-1: Screw tightening sequence when assembling the
IM heatsink (3200)
3
1
2
IM heatsink (3200)
Assembly-2: IM Adjust Washer (C) putting position
IM adjust washer (C)
IM adjust washer (C)
IM adjust washer (C)
3-1. ASSEMBLY
Assembly-3: Method of attachment of the Mask MB Sheet
(456)
Driver
Driver
2
MB Sheet (456), Mask
MB Tape (3000),
Mask Sheet
Mask Sheet
MB N Frame (3000)
2
Assembly-4: Apply grease on the MB N Plate SP
MB N Plate SP
G
G-85
(J-6082-626-A)
Assembly-5: Screw tightening sequence when assembling the
MB N Plate (A (3200))
1
2
3
4
MB N Plate (A (3200))
Assembly-6: Notes on Assembling the RL flexible board
AF cushion
RL-1018 flexible board
1
Attach the AF cushion to the RL-1018 flexible board.
When installing the RL block,
Coincide the D shape hole to
the D shape axis by turning
the mode dial.
Coincide the D shape hole to
the D shape axis by turning
the mode dial.
Claws
Claws
Claws
Claw
Button C2
Mode dial
Mode dial
Switch
Switch
Menu button
rubber
rubber
Flexible board
RL block
Adhesion part
Bosses
Bosses
Boss
2
Install the RL-1018 flexible board to the control switch
block (RL77900) as shown in the figure.
3
Install the button C2 and the menu button rubber, connect the
flexible board, and install the RL block.
4
Install the three screws.
Screws
Click on the first or last page to see other ILCE-7S (serv.man2) service manuals if exist.