Read Sony ILCE-7 / ILCE-7K / ILCE-7R (serv.man2) Service Manual online
ILCE-7/7K/7R_L2
2-8
2-1-6. IMAGER BLOCK SECTION
ns: not supplied
Ref. No.
Part No.
Description
251
1-886-243-11
ISP-008 FLEXIBLE BOARD
252
1-886-244-11
ISL-008 FLEXIBLE BOARD
253
A-1976-127-A MECHA DEVICE SERVICE (3000) (ILCE-7R)
(including IC6101 (CMOS imager) and IS-111 complete
board) (Note 4)
board) (Note 4)
253
A-1976-128-A MECHA DEVICE SERVICE (3100) (ILCE-7/7K)
(including IC6101 (CMOS imager) and IS-111 complete
board) (Note 4)
board) (Note 4)
* 254
Selection Parts IM WASHER (C), ADJUST (Note 2, 3)
255
A-1902-075-C MB CHARGE UNIT (456)
256
1-490-193-21
SHUTTER UNIT (AFE-3313)
257
4-480-795-01
BUTTON, LENS LOCK (779)
258
4-489-471-01
SHEET DP, N FRAME (779)
#197
4-185-990-01
MB SCREW, CHARGE UNIT FIXED
#238 4-287-436-01 SCREW
(M1.7)
#267
4-287-436-21
SCREW (M1.7) (Note 1)
Ref. No.
Part No.
Description
SELECTION PARTS
Ref. No.254
Select the optimum thickness of washer.
Part
No.
Description
* 4-185-999-01 IM WASHER (C), ADJUST (t = 0.05)
* 4-185-999-11 IM WASHER (C), ADJUST (t = 0.1)
* 4-185-999-21 IM WASHER (C), ADJUST (t = 0.15)
* 4-185-999-31 IM WASHER (C), ADJUST (t = 0.2)
* 4-185-999-41 IM WASHER (C), ADJUST (t = 0.25)
* 4-185-999-11 IM WASHER (C), ADJUST (t = 0.1)
* 4-185-999-21 IM WASHER (C), ADJUST (t = 0.15)
* 4-185-999-31 IM WASHER (C), ADJUST (t = 0.2)
* 4-185-999-41 IM WASHER (C), ADJUST (t = 0.25)
#267
(Note 1)
(Note 1)
#267
(Note 1)
(Note 1)
#238
#197
2
Imager Unit Section
(See page 2-9)
253
251
4
255
3
256
252
254
(Note 2, 3)
254
(Note 2, 3)
254
(Note 2, 3)
257
258
Mount Section
(See page 2-10)
(including IC6101 (CMOS imager)
and IS-111 complete board)
(Note 4)
and IS-111 complete board)
(Note 4)
1
ns
ns
DISASSEMBLY
1. Remove in numerical order (
1
to
4
) in the left figure.
#267
Back View
2
#267 X 3
Screw
#197: M1.6 X 4.5 (Tapping)
(Silver)
4-185-990-01
4-185-990-01
4.5
1.6
#238:
M1.7 X 3.5
(Black)
4-287-436-01
(Black)
4-287-436-01
3.5
1.7
5.0
1.7
#267: M1.7 X 5.0
(Red)
4-287-436-21
4-287-436-21
#238
Back View
4
#238 X 3
Note 2: The IM adjust washers (C) differ in thickness.
Make sure to return the removed IM adjust washers to origi-
nal places.
nal places.
When replacing IM adjust washers, refer to “SELECTION
PARTS” If the original state cannot be restored due to loss
of the IM adjust washer, for example, replace the Mecha
Device Service (3000/3100).
PARTS” If the original state cannot be restored due to loss
of the IM adjust washer, for example, replace the Mecha
Device Service (3000/3100).
Note 2: IM調整ワッシャ (C) は,それぞれ厚さが異なります。取り外
したIM調整ワッシャは,必ず元の位置に戻してください。
ま た,IM調 整 ワッシャを 交 換 す る 際 は, SELECTION
PARTS を参照してください。IM adjust washerを紛失するな
どして元の状態に戻せなくなった場合は,Mecha Device
Service (3000/3100) を交換してください。
Note
Note 1: Refer to “Assembly-1: Screw tightening sequence when
assembling the IM plate (3000)”.
Note 1:
Assembly-1: Screw tightening sequence when assembling
the IM plate (3000) を参照してください。
Note 3: Refer to “Assembly-2: IM Adjust Washer (C) putting posi-
tion” when you assemble.
Note 3:
組立時は Assembly-2: IM Adjust Washer (C) putting posi-
tion を参照してください。
Note 4: Precautions for Replacement of the Front Block Assy Ser-
vice
As Front Block Assy Service may be damaged by static
electricity from its structure, handle it carefully like for the
MOS IC.
electricity from its structure, handle it carefully like for the
MOS IC.
In addition, ensure that the receiver is not covered with
dusts nor exposed to strong light.
dusts nor exposed to strong light.
Note 4: フロントブロックAssy サービス交換時の注意
フロントブロックAssy サービスは構造上,静電気により破壊
される恐れがあるため,MOS ICと同様に注意して取り扱って
される恐れがあるため,MOS ICと同様に注意して取り扱って
ください。
また,受光部にはゴミの付着,および強い光がはいることの
ないように注意してください。
ないように注意してください。
Part
No.
Description
* 4-185-999-51 IM WASHER (C), ADJUST (t = 0.3)
* 4-185-999-61 IM WASHER (C), ADJUST (t = 0.35)
* 4-185-999-71 IM WASHER (C), ADJUST (t = 0.4)
* 4-185-999-81 IM WASHER (C), ADJUST (t = 0.45)
* 4-185-999-91 IM WASHER (C), ADJUST (t = 0.495)
* 4-185-999-61 IM WASHER (C), ADJUST (t = 0.35)
* 4-185-999-71 IM WASHER (C), ADJUST (t = 0.4)
* 4-185-999-81 IM WASHER (C), ADJUST (t = 0.45)
* 4-185-999-91 IM WASHER (C), ADJUST (t = 0.495)
Click on the first or last page to see other ILCE-7 / ILCE-7K / ILCE-7R (serv.man2) service manuals if exist.