Read Sony ILCA-77M2 / ILCA-77M2M / ILCA-77M2Q Service Manual online
ILCA-77M2/77M2M/77M2Q_L2
1-2
1-4. CHECKING THE Wi-Fi FUNCTION
Perform the following procedure to check the Wi-Fi function.
Required equipment: Windows personal computer with Wi-Fi interface
1. Turn on the power of the unit.
2. Perform the following operations for the unit.
MENU→ →[Ctrl w/ Smartphone]→●
3. The Ctrl w/ smartphone screen is displayed.
4. When preparation for Wi-Fi has been completed, the “Running as an access point.” screen opens and a password for Wi-Fi connection is displayed.
2. Perform the following operations for the unit.
MENU→ →[Ctrl w/ Smartphone]→●
3. The Ctrl w/ smartphone screen is displayed.
4. When preparation for Wi-Fi has been completed, the “Running as an access point.” screen opens and a password for Wi-Fi connection is displayed.
SSID
DIRECT-XXXX:MODEL-NAME
Password
XXXXXXXX
Device Name
ILCA-XXXX
Wi-Fi
Ctrl w/ Smartphone
Operate smartphone to connect to
this device via Wi-Fi.
Cancel
Enter
5. Confirm on the personal computer that the unit is detected as a connectable wireless network.
6. To further confirm that the unit is connectable, connect the unit to the personal computer and double-click the “current connection” from the icon
6. To further confirm that the unit is connectable, connect the unit to the personal computer and double-click the “current connection” from the icon
displayed on the notice field, make sure that the unit is displayed in the Wireless internet access column.
1-3. NOTES FOR REPLACING THE EVF DISPLAY DEVICE (LCD902) OR THE AM-1004 BOARD
Adjustment values of each EVF display device (LCD902) are stored on the AM board.
Therefore, when the LCD902 or the AM board has been replaced, write WB adjustment values.
Therefore, when the LCD902 or the AM board has been replaced, write WB adjustment values.
10/11_193_26_0
Brightness value
White balance value
The label which is put on repairing EVF display device (LCD902)
When LCD902 is replaced:
1. Check and write down the adjustment values printed on the repairing EVF display device (LCD902) label.
2. After the LCD902 has been replaced, execute “EVF Data Input” on the ADJUST tab by using the Adjust manual to write the adjustment values.
1. Check and write down the adjustment values printed on the repairing EVF display device (LCD902) label.
2. After the LCD902 has been replaced, execute “EVF Data Input” on the ADJUST tab by using the Adjust manual to write the adjustment values.
When replacing AM board (in case adjustment values can be read):
1. In case the unrepaired unit starts and adjustment values can be read by using the Adjust manual, execute “ADJUSTMENT DATA BACKUP” on
1. In case the unrepaired unit starts and adjustment values can be read by using the Adjust manual, execute “ADJUSTMENT DATA BACKUP” on
the DATA tab.
2. After the AM board has been replaced with a AM board for repair, execute “ADJUSTMENT DATA BACKUP” on the DATA tab of the Adjust
manual to write the extracted data to the unit.
When replacing AM board (in case adjustment values cannot be read):
Consult with each Head Quarters.
Consult with each Head Quarters.
Click on the first or last page to see other ILCA-77M2 / ILCA-77M2M / ILCA-77M2Q service manuals if exist.