Read Sony DSLR-A560 / DSLR-A560L / DSLR-A560Y / DSLR-A580 / DSLR-A580J / DSLR-A580L / DSLR-A580Y Service Manual online
DSLR-A560/A560L/A560Y/A580/A580L/A580Y/A580J_L2
2-9
Ref. No.
Part No.
Description
Ref. No.
Part No.
Description
2-1-7. IMAGER SECTION
ns: not supplied
301
A-1773-801-A IM IMAGER UNIT 14M (DSLR-A560/A560L/A560Y)
(including CP001 (CMOS imager) and IS-077 complete board) (Note1, 3, 4)
301
A-1799-352-A IM IMAGER UNIT 16M (866) T
(DSLR-A580/A580L/A580Y/A580J)
(including IC4501 (CMOS imager) and IS-073 complete board) (Note 2, 3, 4)
302
4-194-226-01 IM PLATE, LPF RETAINER
303
1-856-102-11 OPTICAL FILTER BLOCK (OFB-01-09)
(DSLR-A560/A560L/A560Y) (Note1, 3)
303
1-856-138-11 OPTICALFILTER BLOCK (OFB-01-13)
(DSLR-A580/A580L/A580Y/A580J) (Note2, 3)
304
4-193-875-01 CUTTER, IM FLARE (S) (Note1, 2)
305
4-185-993-01 IM SHEET, SPACER
(DSLR-A560/A560L/A560Y) (Note1)
306
4-194-127-01 IM TAPE, SPACER FIXED (S)
(DSLR-A560/A560L/A560Y) (Note1)
307
4-256-336-11 IM SHEET 4, SPACER
(DSLR-A580/A580L/A580Y/A580J) (Note2)
308
4-194-225-01 IM TAPE FPC GUIDE
*
309
4-194-227-01 IM PLATE GUIDE IMAGER FPC
310
1-880-878-11 ISP-001 FLEXIBLE BOARD
311
1-880-877-11 ISL-001 FLEXIBLE BOARD
312
4-194-224-01 IM SHEET GRAPHITE
#64
2-666-551-21 SCREW, TAPPING, P2
Note
Screw
Note1: Refer to the following statements when replacing the Optical
Filter Block. (DSLR-A560/A560L/A560Y)
Method of Removal
(1) Pour resolvent (alcohol or cleaning agent) between the
imager and the IM Spacer Sheet.
* Wait for that the adhesive power of the IM Spacer Fixed
Tape weakens.
(2) Remove the IM Spacer Sheet from the imager.
Pour resolvent (alcohol or cleaning agent)
between the imager and the IM Spacer Sheet.
Method of Attachment
(1) Attach the IM Flare Cutter and the Optical Filter Block by
aligning them with the outer shape of the IM Spacer Sheet
evenly.
* The two-layer side of the Optical Filter Block is on the
imager side.
(2) Attach the IM Spacer Fixed Tape by aligning it with the
outer shape of the IM Spacer Sheet evenly.
The two-layer
side is on the
imager side.
Mount
Side
Imager
Side
Optical Filter Block
Peel off the
released paper.
Peel off the
released paper.
Peel off the
released paper.
IM Flare Cutter
IM Spacer Sheet
IM Spacer
Fixed Tape
(3) Set the Optical Filter Block in its attachment jig
(J-6082-737-A), with the attached IM Spacer Fixed Tape
facing upward.
(4) Press the imager down into the jig as shown below to
attach it to the Optical Filter Block.
J-6082-737-A
Imager
Peel off the released paper.
Note2: Refer to the following statements when replacing the Optical
Filter Block. (DSLR-A580/A580L/A580Y/A580J)
Method of Removal
(1) Pour resolvent (alcohol or cleaning agent) between the
imager and the Spacer IM Sheet 4.
* Wait for that the adhesive power of the Spacer IM
Sheet 4 weakens.
(2) Remove the Spacer IM Sheet 4 from the imager.
Pour resolvent (alcohol or cleaning agent)
between the imager and the Spacer IM Sheet 4.
Method of Attachment
(1) Attach the IM Flare Cutter and the Optical Filter Block by
aligning them with the outer shape of the Spacer IM
Sheet 4 evenly.
* The two-layer side of the Optical Filter Block is on the
imager side.
The two-layer
side is on the
imager side.
Mount
Side
Imager
Side
Optical Filter Block
Peel off the
released paper.
Peel off the
released paper.
IM Flare Cutter
Spacer IM Sheet 4
(2) Set the Optical Filter Block in its attachment jig
(J-6082-737-A), with the attached Spacer IM Sheet 4
facing upward.
(3) Press the imager down into the jig as shown below to
attach it to the Optical Filter Block.
J-6082-737-A
Imager
Peel off the released paper.
DSLR-A580/A580L/
A580Y/A580J
DSLR-A560/A560L/
A560Y
Anti Shake Unit Section
(See page 2-10)
(including HOL-007 flexible board)
301
(including CP001 (DSLR-A560/A560L/A560Y) /
IC4501 (DSLR-A580/A580L/A580Y/A580J) (CMOS imager) and
IS-073 (DSLR-A580/A580L/A580Y/A580J) /
IS-077 (DSLR-A560/A560L/A560Y) complete board)
(Note1, 2, 3, 4)
302
303
(Note1, 2, 3)
310
311
307
(Note2)
308
309
312
ns
#64
#64
304
(Note1, 2)
305
(Note1)
306
(Note1)
Note4:
Precautions for Replacement of Imager
•
If the imager has been replaced, carry out all the adjustments for the
camera section.
•
As the imager may be damaged by static electricity from its structure,
handle it carefully like for the MOS IC.
In addition, ensure that the receiver is not covered with dusts nor
exposed to strong light.
#64: M1.7 X 5.0 (Tapping)
(Silver)
2-666-551-21
5.0
1.7
Note3: Refer to “3-2. CLEANING PROCEDURE OF OLPF” on page
3-7 for method of cleaning the OLPF.
Click on the first or last page to see other DSLR-A560 / DSLR-A560L / DSLR-A560Y / DSLR-A580 / DSLR-A580J / DSLR-A580L / DSLR-A580Y service manuals if exist.