DSLR-A100, DSLR-A100H, DSLR-A100K, DSLR-A100W (serv.man3) - Sony Digital Camera Service Manual (repair manual). Page 8

6-6

DSLR-A100_ADJ

Besides the camera to be adjusted, prepare the DSLR-A100 that satisfies the following conditions and use it as a master body.
• It should operate normally (must satisfy the specifications)
• It is in the factory setup state (already adjusted in the factory)

Use the back side of the AF chart, etc. as an all-white chart.

PC for use
The PC loaded on either Windows 2000 Professional or XP and USB terminal originally
40MB or more of available memory and 15MB or more of available hard-disk space
VGA or more monitor capable of displaying at least 32,000 colors.

The power supply for the vibration tester is 100V. If the 100V power supply is not available, use the variable transformer to
adjust the power supply to 100V.

• Oscilloscope
• Regulated DC power supply
• Digital multi meter
• Variable transformer
• Hexangular wrench (1.5) or hexangular screwdriver
• Tripod

AF chart I
J-6082-594-A

J-15

DSC shutter tester
J-6082-582-A

J-5

Preset signal
adaptor
J-6082-593-A

J-14

Preset tester
J-6082-592-A

J-13

Macbeth color
checker
J-6082-585-A

J-8

Luminance meter
LS-100
J-6082-583-A

J-6

Luminance box
J-6082-581-A

J-4

Master lens for shake
J-6082-589-A

J-10

Shake offset
chart II
J-6082-590-A

J-11

Vibration tester
J-6082-588-A
(Note 4)

J-9

Light balance filter
LB200
J-6082-591-A

J-12

Chroma meter
CL-200
J-6082-584-A

J-7

Personal computer
(Note 3)

J-1

J-3

Back ground paper
J-2501-130-A

USB cable
1-833-062-12

J-2

• Master body (Note 1)
• All white chart (Note 2)
• Flood lamp