Read Sony DSLR-A100 / DSLR-A100H / DSLR-A100K / DSLR-A100W (serv.man3) Service Manual online
6-52
DSLR-A100_ADJ
2-2. LCD ALL SEGMENT ON
LCD displays check
Slide the POWER switch to the ON position, and then insert the battery while pressing and holding the MENU button, DELETE button,
and “b” button of controller keys concurrently.
(To cancel, remove the battery and then insert it again.)
and “b” button of controller keys concurrently.
(To cancel, remove the battery and then insert it again.)
Note:
LCD monitor backlight and viewfinder turn on. AF area is illuminated sequentially.
2-3. FLASH LEVEL SHIFT
This adjustment is to shift the flash level optionally.
Required equipment
PC with preinstalled the DSLR-A100 adjustment program
USB cable
AC adaptor/charger (AC-VQ900AM)
USB cable
AC adaptor/charger (AC-VQ900AM)
Procedure
1. Set camera to adjustment mode.
Refer to “Starting up the DSLR-A100 adjustment program (in the adjustment mode)”.
2. Click “FLASH LEVEL” in the adjustment menu. “Does it adjust?” appears.
3. Click “YES”. “Please input Type and Shift” appears. (Fig. 1)
4. Select the flash type by clicking the “V” button of the “FLASH TYPE”.
3. Click “YES”. “Please input Type and Shift” appears. (Fig. 1)
4. Select the flash type by clicking the “V” button of the “FLASH TYPE”.
* Select “other” for the flashes not listed.
5. Select the amount of shift by clicking the “V” button of the “SHIFT LEVEL”.
6. Click “SET” button. “FLASH LEVEL Adjustment has completed!” appears when completed.
6. Click “SET” button. “FLASH LEVEL Adjustment has completed!” appears when completed.
* After shifting the flash level, check the flash level.
Fig. 1
Click on the first or last page to see other DSLR-A100 / DSLR-A100H / DSLR-A100K / DSLR-A100W (serv.man3) service manuals if exist.