Read Sony DSC-WX350 (serv.man2) Service Manual online
DSC-WX350
4-17
8. Set the gear of the Drive Gear Barrel at a position where the gear is shifted by about 1.5 teeth in the direction of arrow A from the rounded
cutout of the Linear Cam Barrel.
9. While inserting the eight bosses of the Core unit_2 into the eight grooves of the Linear Cam Barrel and the Drive Gear Barrel, install the
Core unit_2 to the Linear Cam Barrel and the Drive Gear Barrel.
Linear Cam Barrel,
Drive Gear Barrel
Drive Gear Barrel
Core unit_2
Bosses
Grooves
Flexible
Board
Board
Rounded
cutout
cutout
A
Rounded cutout
Gear
1.5 teeth
10. While inserting the six bosses of the Core unit_1 into the six grooves of the Fixed Barrel, install the Core unit_1 to the Fixed Barrel.
Fixed Barrel
Bosses
Grooves
Core unit_1
Hole of the Fixed Barrel for passing
the Flexible Board
the Flexible Board
11. Push the Linear Cam Barrel to protrude it to the object side so that the Drive Gear Barrel can be held.
12. Pull down the Drive Gear Barrel to the maximum.
13. Turn the Drive Gear Barrel clockwise to the maximum.
12. Pull down the Drive Gear Barrel to the maximum.
13. Turn the Drive Gear Barrel clockwise to the maximum.
Drive Gear Barrel
Object side
Linear Cam Barrel
Click on the first or last page to see other DSC-WX350 (serv.man2) service manuals if exist.