Read Sony DSC-WX350 (serv.man2) Service Manual online
DSC-WX350
4-16
4. Set the flexible board of the Core unit_3 and the concave into which the projection part of the Ornamental Ring A of the 1st Group Assy at
the positions shown below.
While inserting the three bosses of the Core unit_3 into the three grooves of the 1st Group Assy, attach the 1st Group Assy to the Core
unit_3.
unit_3.
1st Group Assy
Core unit_3
Bosses
Boss
Concave into which
the projection part of
the Ornamental Ring A
the projection part of
the Ornamental Ring A
Description is provided here with the Ornamental Ring A and the Barrier Base removed.
For disassembling and assembling methods of the Ornamental Ring A and the Barrier
Base, refer to "(1) Barrier Base Replacing Method".
For disassembling and assembling methods of the Ornamental Ring A and the Barrier
Base, refer to "(1) Barrier Base Replacing Method".
Grooves
Flexible Board
5. Match the cabinet number of the 1st Cam Barrel Assy with the flexible board of the Core unit_3, and gently attach the 1st Cam Barrel Assy.
Push the 1st Cam Barrel Assy and engage the three claws.
6. Check that the lens moves smoothly from the retracted to the TELE end.
Flexible Board
1st Cam Barrel Assy
Hooks
Claws of the
3rd Group Assy
3rd Group Assy
Push the 1st Cam Barrel Assy and
engage the three claws.
engage the three claws.
Cabinet
Number
Number
Description is provided here with the Ornamental Ring A and the Barrier Base removed.
For disassembling and assembling methods of the Ornamental Ring A and the Barrier
Base, refer to "(1) Barrier Base Replacing Method".
For disassembling and assembling methods of the Ornamental Ring A and the Barrier
Base, refer to "(1) Barrier Base Replacing Method".
7. While setting the rounded cutout of the Linear Cam Barrel and the edge of gear of the Drive Gear Barrel at the position shown below, install
the Linear Cam Barrel to the Drive Gear Barrel.
Drive Gear Barrel
Linear Cam Barrel
Rounded cutout
Edge of gear
Click on the first or last page to see other DSC-WX350 (serv.man2) service manuals if exist.