Read Sony DSC-WX300 (serv.man2) Service Manual online
DSC-WX300_L2
1-14
Ver. 1.1 2013.04
(16) Fully turn the 2nd Cam Barrel clockwise to the retracted state and detach the 2nd Group Assy.
2nd Cam Barrel
Core unit_3
2nd Group Assy
(17) Turn the rear edge of Core unit_3 counterclockwise to detach it.
2nd Cam Barrel,
Linear Barrel
Linear Barrel
3rd Group Assy
Rear edge of Core unit_3
(18) Turn the 2nd Cam Barrel counterclockwise to detach it.
2nd Cam Barrel
2nd Cam Barrel
Linear Barrel
Installation
(1) While matching the cabinet number with the circulur mark and inserting the three bosses of the Linear Barrel into the three grooves of the 2nd
(1) While matching the cabinet number with the circulur mark and inserting the three bosses of the Linear Barrel into the three grooves of the 2nd
Cam Barrel, install the 2nd Cam Barrel to the Linear Barrel. Fully turn the 2nd Cam Barrel clockwise.
Cabinet
Number
Number
Circular mark
Bosses
Boss
Groove
Liner Barrel
2nd Cam Barrel
2nd Cam Barrel
(2) While inserting the three bosses of the 3rd Group Assy into the three grooves of the 2nd Cam Barrel, install the 3rd Group Assy to the 2nd Cam
Barrel and the Linear Barrel and then fully turn the 3rd Group Assy clockwise.
Grooves
2nd Cam Barrel,
Liner Barrel
Liner Barrel
Circular mark
3rd Group Assy
Bosses of wide
guide
guide
Bosses of narrow
guide
guide
3rd Group Assy
(3) While setting the marks of the 2nd Group Assy and the 3rd Group Assy at the position shown below and inserting the three bosses of the 2nd Group
Assy into the three grooves of the 2nd Cam Barrel, install the 2nd Group Assy to the 2nd Cam Barrel.
Boss
Grooves of the
2nd Cam Barrel
2nd Cam Barrel
Groove of the
2nd Cam Barrel
2nd Cam Barrel
2nd Group Assy
Mark
Mark of the 3rd Group Assy
Bosses
Boss
2nd Group Assy
Click on the first or last page to see other DSC-WX300 (serv.man2) service manuals if exist.